45
• In the display „Prog aktiv“ is shown and both blue „status bars“ are on resp.
lit during the heating up.
NOTE:
During heating up, some steam can briefly escape from the pressure
valve for lid locking.
• When the operation temperature of the selected programme is reached, the
blue „status bars“ are lighting continuously, the runtime is counted down at a
1 minute interval and the colon is flashing.
• After the end of the programme the appliance automatically switches to the
keep warm function for 60 minutes. This is announced by a repeated signal tone.
The display shows the keep warm time ascending at a 1 minute interval up to
60 minutes.
•
If you do not need the keep warm function, push the button
„Start/Pause/Stopp” for 3 seconds for a final end.
The appliance is switched off. This is announced by a repeated signal tone.
• After expiration of the time for „keep warm“, the appliance switches off
automatically. This is announced by a repeated signal tone. In the display, both
points in the middle of the time/temperature display are blinking.
• Attention: The appliance is under pressure!
Before opening the lid, push the button for the steam outlet valve to let the
steam escape safely.
• Only when the steam has completely escaped, the lid may be opened carefully. Lift the lid in a way so
that hot water which has accumulated inside of the lid, can flow back into the pot. When lifting the
lid, pay attention to hot steam which can escape around the lid.
• For a permanent and safe switch-off, always disconnect the mains plug from the socket after every use.
