18
EN
GLASS CERAMIC COOKING AREA
To provide efficient heating, please only use flat
bottom pans whose diameter is the same or
slightly bigger than that of the heating area.
Avoid overflows; reduce the heat supply as far as
the liquid begins to boil.
Don’t leave empty pots and pans on the heating
surface; be sure to switch off the cooking zone
after you have removed the receptacles from the
heating area.
In case of even a slight fracture on the cooking
surface, disconnect the electric power supply
immediately.
Maintenance
Ceramic cook field
First of all, remove stray food bits and grease
drops from the cooking surface with the help of the
special scraper. Clean the hot area thoroughly with
„Cera Clen“, „Eilfix“
or other similar products by
means of a paper towel. Rinse with water again
and dry with a clean cloth. To avoid any possible
damage to the surface, pieces of melted aluminium
foil or plastics, remains of sugar or highly
sacchariferous food have to be immediately
removed from the hot cooking area by means of
the special scraper.
For this purpose, the use of any abrasive sponges
or irritating chemical detergents such as oven
sprays or spot removers is not allowed.
Electric heating zone
Clean the heating zones only by means of a dry
cloth. Use standard washing-up liquids only. While
cleansing, occasionally add a drop of vegetable oil.
Residual heat indicator
As soon as the surface temperature of a cooking
zone exceeds 50 °C, the corresponding control
light
1
indicates the rest warmth and, thus, warns
of a possible skin-burn. After having switched off
the heating elements, you can still use the rest
warmth for about 5-10 min. to warm up food or
keep the cooked food warm.
Attention:
Steam escape slits
2
in the rear
edge of the cooking field serve to let out the
steam from the oven. The slits must be
always kept free. Don’t touch with the hands
– ambustion danger!
1
2
