6
Cooking time starts counting down when the
pressure in the cooker reaches the required level
and the floating valve is lifted into its upper
position. When cooking time expires, the
appliance will switch to "Warming" mode. The
display will show b0:00. Where 0:00 shows the
time the “Warming” mode is on.
The display will show b0:00. Where 0:00 shows
the time the “Warming” mode is on.
Warming program
This program is used to warm up the food or to
keep it warm.
Press the Cancel/Warming key.
The appliance will heat up the food or maintain a
temperature between 60°C and 80°C.
To cancel the program, press the
"Cancel/Warming" key.
Program table
Programs
Original
pressure
cooking time
(min)
Time
settings
(min)
Pressure (kPa)
Fry
00:25
/
Lid open
Soup
00:30
1 - 99
50 - 60
Rice
00:10
1 - 99
50 - 60
Stew
00:15
1 - 99
50 - 60
Slow cook
02:00
1h - 9h
0
Steam
00:15
1 - 99
50 - 60
Warming
/
/
0
Tip:
Clean the appliance immediately after use
(see chapter "Cleaning").
Cleaning
The appliance and parts of the appliance are not
dishwasher safe.
Thoroughly clean the appliance after each use, as
well as before use if it hasn't been used for a
while.
1. Before cleaning, disconnect the appliance
from the power mains and wait for it to cool
down.
2. Rinse the cooking pot with hot water and
some liquid detergent, and dry thoroughly.
3. Wipe the housing with a damp cloth. Do not
wash the housing under running water and do
not immerse it in water.
4. After use, remove the condensate tank and
rinse it.
5. Remove the lid and clean it. Remove the
sealing ring by gently pulling it upwards.
Clean the sealing ring under running hot water
with some detergent. Dry the sealing ring
thoroughly. When putting sealing ring back on,
make sure it is correctly fitted under the
sealing ring holder. Make sure there are no
wrinkles on the gasket. If the sealing ring is
not fitted correctly, the appliance will not work
and it may be damaged. If you notice during
cleaning that the sealing ring is damaged or
cracked, do not use the appliance and call a
Gorenje service center
to replace it.
6. Remove the metal filter, clean it, and replace it
onto the lid.
7. Clean the safety valve.
8. To make sure the appliance works properly,
make sure the heating plate is clean. Clean
the heating plate with a damp cloth and dry it
thoroughly.
