5
Features
Front Panel
No. Component
Description
1
Port Selection
Pushbuttons
Pressing one of the port selection pushbuttons will bring
the focus of one of the following to the corresponding port;
KVM only, Audio only, USB only,
or
KVM, Audio and USB
simultaneously
. What functionality is switched is determined by
the
Mode Selection Pushbutton
(see below).
Pressing and holding pushbuttons 1 and 2 simultaneously
for more than 2 seconds will initiate an auto scan. On the
B004-2DUA4-K, pressing and holding pushbuttons 3 and 4
simultaneously for more than 2 seconds will perform a USB
keyboard/mouse reset.
2
Mode
Selection
Pushbutton
Press this pushbutton to determine the functionality that is
switched to a port when its pushbutton is pressed. Pressing the
mode selection pushbutton once highlights the
KVM, Audio
and
USB
functionality icons all at the same time. Pressing it twice
highlights
KVM only
; three times
Audio only
; and four times
USB
only
.
3
Port LEDs
Each port contains three LEDs;
KVM, Audio,
and
USB
. The
corresponding LED will illuminate under the port that has its
focus. For example, if port 1 has the focus of the
KVM, Audio,
and
USB
all at the same time, then all three LEDs will illuminate
under port 1.
4
Console Audio
Connectors
A separate set of Console
Speaker
and
Microphone
jacks are
located on the front panel of the unit for greater accessibility.
Devices plugged into these ports will take priority over devices
plugged into the Console
Speaker
and
Microphone
jacks on the
back panel of the unit.
5
USB 2.0
Peripheral Port
USB 2.0 devices (flash drives, printers, scanners, etc.) can
be plugged into this port and shared between the connected
computers.
1
1
2
3
3
4
5
15-08-306 93-3242-EN.indd 5
9/3/2015 1:30:37 PM
