14
Basic Operation
Port Switching Hotkeys
To switch functionality between ports, a keyboard hotkey command is entered that
determines what port is accessed and which functionality is assigned to it. This
command starts by pressing [Scroll Lock] [Scroll Lock] or [Ctrl] [Ctrl]. [Scroll Lock]
[Scroll Lock] is used by default. To toggle between these two, see
Alternate Port
Switching Hotkey Command
in the
Hotkey Setting Mode
section of this manual.
The table below contains the
Port Switching Hotkeys
used to determine what port is
accessed and which functionality is assigned to it.
Note:
The table below uses the
[Scroll Lock] [Scroll Lock] preceding sequence. Simply substitute [Ctrl][Ctrl] if you decide
to change the
Hotkey Preceding Sequence
.
Hotkey Command
Action
[Scroll Lock] [Scroll Lock] [Enter]
Switches focus of the
KVM, Audio
and
USB
from the port that currently has the KVM
focus to the port that follows it. (e.g. 1 to 2,
2 to 3, etc.)
[Scroll Lock] [Scroll Lock] [K] [Enter]
Switches focus of the
KVM only
from the port
that currently has the
KVM
focus to the port
that follows it.
[Scroll Lock] [Scroll Lock] [U] [Enter]
Switches focus of the
USB only
from the port
that currently has the
USB
focus to the port
that follows it.
[Scroll Lock] [Scroll Lock] [S] [Enter]
Switches focus of the
Audio only
from the
port that currently has the
Audio
focus to the
port that follows it.
[Scroll Lock] [Scroll Lock] [n]* [Enter]
Switches focus of the
KVM, Audio
and
USB
to
the selected port number.
[Scroll Lock] [Scroll Lock] [n]* [K] [Enter]
Switches focus of the
KVM only
to the se-
lected port number.
[Scroll Lock] [Scroll Lock] [n]* [U] [Enter]
Switches focus of the
USB only
to the se-
lected port number.
[Scroll Lock] [Scroll Lock] [n]* [S] [Enter]
Switches focus of the
Audio only
to the se-
lected port number.
[Scroll Lock] [Scroll Lock] [n]* [K] [U] [Enter]
Switches focus of the
KVM and USB
to the
selected port number.
[Scroll Lock] [Scroll Lock] [n]* [K] [S] [Enter]
Switches focus of the
KVM and Audio
to the
selected port number.
[Scroll Lock] [Scroll Lock] [n]* [U] [S] [Enter]
Switches focus of the
USB and Audio
to the
selected port number.
[Scroll Lock] [Scroll Lock] [n]* [K] [S] [U] [Enter]
Switches focus of the
KVM, Audio
and
USB
to
the selected port number.
[Scroll Lock] [Scroll Lock] [A] [Enter]
Initiates
Auto Scan
mode at the default inter-
val of 5 seconds per port. Press the [Esc] or
[Spacebar] key to exit
Auto Scan
mode.
[Scroll Lock] [Scroll Lock] [A] [n]* [Enter]
Initiates
Auto Scan
mode at the selected time
interval. Press the [Esc] or [Spacebar] key to
exit
Auto Scan
mode.
* [n] stands for the port number of the computer that you are switching to, or the number of seconds
(from 1 to 99) that an Auto Scan remains on each port.
15-08-306 93-3242-EN.indd 14
9/3/2015 1:30:38 PM
