11
COMPUTER 1
HOST KVM
CLIENT KVM
Installation
Quad-View Mode Installation
Refer to the following steps and diagram to set up your KVM switch Quad-View Mode
installation.
Notes:
1. Before making any connections, make sure that power to all devices being connected to the KVM switch is
turned off. Unplug the power cords of any computers that have the Keyboard Power On function.
2. In Quad-View Mode, the keyboard and mouse console ports on the Client KVM are disabled, as are the front-
panel pushbuttons of the Client KVM.
3. The diagram below shows the B004-2DUA4-K installation. Installation for the B004-2DUA2-K is the same
except there are fewer ports.
1
4
3
8
8
6
2
18
18
9
5
7
1
Connect the RJ45 QUAD port on one Dual Display KVM switch to the RJ45 QUAD
port on a second Dual Display KVM switch.
2
Flip the Quad-View Mode Switch of one KVM to the
Host
position, and the switch of
the other KVM to the
Client
position.
3
Connect a monitor to the DVI console A port on the back panel of the
Host
KVM switch.
4
Connect a monitor to the DVI console B port on the back panel of the
Host
KVM switch.
5
Connect a monitor to the DVI console A port on the back panel of the
Client
KVM switch.
6
Connect a monitor to the DVI console B port on the back panel of the
Client
KVM switch.
7
Connect a USB keyboard and mouse to the corresponding USB keyboard and
mouse console ports on the back of the
Host
KVM switch. The USB keyboard and
mouse console ports on the back of the
Client
KVM switch can remain open.
15 16
14
13
11 12
15-08-306 93-3242-EN.indd 11
9/3/2015 1:30:38 PM
