18
Basic Operation
Pushbutton 1 and 2 Command
By default, pressing pushbuttons 1 and 2 at the same time for two seconds will initiate
Auto Scan Mode
, but you can set it to perform any
Hotkey Setting Mode
command that
you want. The
Restore Default Settings, Disable Port Switching Hotkeys
, and
Firmware
Upgrade Mode
commands cannot be used. To set the
Pushbutton 1 and 2 Command
,
do the following.
1. Activate
Hotkey Setting Mode
using the aforementioned command
2. Press and release the [C] key
3. Perform the command that you wish to set. (e.g. Press and release the [W] key to set
the
Pushbutton 1 and 2 Command
to turn
Mouse Port Switching Functionality
on/off.
To return the
Pushbutton 1 and 2 Command
to its default, press and release the [A] key
in step 3.
Pushbutton 3 and 4 Command
By default, pressing pushbuttons 3 and 4 at the same time for two seconds will perform
a
USB Keyboard/Mouse Reset
, but you can set it to perform any
Hotkey Setting Mode
command that you want. The
Restore Default Settings, Disable Port Switching Hotkeys,
and
Firmware Upgrade Mode
commands cannot be used. To set the
Pushbutton 3 and 4
Command
, do the following.
1. Activate
Hotkey Setting Mode
using the aforementioned command
2. Press and release the [C] key, and then press and release the [2] key
3. Perform the command that you wish to set. (e.g. Press and release the [W] key to set
the
Pushbutton 3 and 4 Command
to turn
Mouse Port Switching Functionality
on/off.)
To return the
Pushbutton 3 and 4 Command
to its default, press and release the [F5]
key in step 3.
15-08-306 93-3242-EN.indd 18
9/3/2015 1:30:39 PM
