53
JE1200-001_v01
Tip
Product information and tips for use
The appliance is intended for domestic use. In case
●
it is used for food business purposes, the warranty
conditions shall change.
Before first use, remove all packaging from the
●
appliance and wash all accessories thoroughly.
Unplug the appliance when finished extracting juice.
●
For easier operation you may put a plastic bag into
●
the pulp container and discard it together with the pulp
after extracting juice.
Preparing for operation
DISASSEMBLING
Before first use, disassemble the appliance and
wash all parts in contact with processed fruit or
vegetables.
Place the appliance near a wall socket on a clean hard
●
and dry surface.
1
Press the locking clamps all the way down to release
the lid.
2
Remove the pusher and the lid.
3
Slide out the pulp container.
4
Remove the juice bowl with the strainer by turning the
bowl counter-clockwise so that the symbol on the bowl is
aligned with the symbol
on the motor unit. Remove the
juice bowl from the motor unit.
Wash all parts (except the motor unit) carefully in
warm water with some washing liquid. You can
also clean them in a dishwasher at max. 60°C
(except the juice bowl, strainer and motor unit).
Dry all parts thoroughly and replace once dry.
ASSEMBLING
1
Place the juice bowl on the motor unit, aligning the
symbol
on the underside of the bowl with the symbol
on the motor unit.
2
Lock the juice bowl by turning it clockwise so that the
symbol on the motor unit is aligned with the
symbol on
the underside of the bowl.
3
Mount the strainer on the skimmer so that the notch on
the skimmer is aligned with the groove in the strainer.
The strainer may be mounted in one position
only.
4
Slide the pulp container under the lid as follows: lean the
pulp container and place it under the insert of the bowl so
that the protrusion in the pulp container is placed inside the
groove in the bowl. Then slide it in towards the motor unit.
5
Install the lid so that the protrusion of the lid is in the
notch of the juice bowl.
6
Lift up both clamps and clamp them onto the fasteners
located on the lid.
7
Press the clamps to the juice bowl (a characteristic click
indicates that they are clamped correctly).
8
Put the juice collector so that the juice spout is inside the
collector.
If you fail to assemble the locking clamps
correctly, a safety device will prevent the
switch-on of the appliance.
Prepare washed fruit and vegetables and place
them near the appliance.
B
C
Technical data
The technical data are given on the name plate.
Maximum continuous operation time:
2 minutes
Time interval between successive uses:
30 minutes
Noise level (L
WA
)
77 dB/A
The juice extractor type JE1200 does not require connection
to a grounded socket
.
ZELMER appliances satisfy the requirements of relevant
standards.
The appliance meets the requirements of the following
directives:
Low Voltage Device (LVD) – 2006/95/EC;
–
Electro-Magnetic Compatibility (EMC) – 2004/108/EC.
–
The product is marked with CE symbol on the name plate.
Appliance parts
1
Motor unit
2
Control knob (PULSE, 0, level 1, level 2)
3
Skimmer
4
Feet
5
Power cord
6
Juice bowl
7
Spout
8
Locking clamps
9
Strainer
10
Lid
11
Feeding tube
12
Pusher
13
Jug
14
Jug lid with froth separator
15
Pulp container
16
Brush
A
