52
JE1200-001_v01
Dear Customer,
Congratulations on your choice of our appliance and
welcome to the group of Zelmer product users.
In order to achieve the best possible results we recommend
using exclusively original Zelmer accessories. They have
been specially designed for this product.
Please, read these instructions carefully. Special attention
should be paid to safety information. Keep this manual so
that you can refer to it in the future.
Description of the appliance
Your juice extractor is designed for fast fruit and vegetable
juice centrifuging with automatic separation of pulp.
Centrifugation speed was carefully selected to ensure
excellent quality juices. Small particles of fruit (or vegetable)
contained in the extracted juice are healthy, but may affect
the clarity of juice. This is an intended effect, as keeping
the highest nutrient, health and dietetic values of your
juices is more important than their clarity. The quantity of
juice obtained with 1kg of fruit or vegetables depends on
their freshness, cleanness of the filter and condition of the
shredding disc (e.g. for fresh carrots it is 50-60%). All parts
in contact with processed products are made of materials
suitable for contact with food.
Safety operation instructions
Make sure that you understand all of the information
below.
Please read the entire user manual before using the
appliance.
Guide food through the feeder tube only with the
●
pusher provided with the appliance.
Be particularly cautions when the juice extractor is
●
used in the presence of children.
This appliance is not intended for use by persons
●
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning use of the appliance by
a person responsible for their safety.
Children should be supervised to ensure that they do
●
not play with the appliance.
Never put the appliance on any wet surfaces.
●
Warning!
Risk of property damage
Do not disconnect the plug from the socket by pulling
●
on the cord.
Place the motor unit near a wall socket on a flat, stable
●
surface so that the vent holes of the appliance are not
blocked.
The appliance must be plugged only to an alternating
●
current socket with power corresponding to the power
stated on the name plate of the appliance.
Immediately stop the operation and unplug the
●
appliance if any liquid gets into the motor. Return
the appliance to an authorised service facility for
examination and servicing.
Never overload the appliance by processing extensive
●
amounts of products or pushing them too hard into the
feeding tube.
Turn off the appliance immediately if you notice that it
●
vibrates excessively or the rotation speed has dropped.
Wash the strainer and its housing.
Turn the motor off and unplug the appliance if food
●
is blocked in the feeder or on the grinding blades.
Remove the cause of blocking.
Do not expose the appliance to temperatures
●
exceeding 60°C.
Do not leave the appliance unattended when it is
●
plugged to a socket.
Do not immerse the motor unit in water or rinse it under
●
running water.
Never clean the casing with any aggressive detergents
●
(emulsion, milk, paste, etc). They can remove graphic
symbols such as labels, caution signs, etc.
Clean all metal parts of the appliance with a soft brush,
●
especially the strainer and the shredding disc.
Never operate the appliance without the pulp
●
container.
Danger! / Warning!
Risk of injury
Never operate the appliance if the power cord is
●
damaged or the casing is visibly damaged.
If the non-detachable cord is damaged, it should be
●
replaced by the producer, proper service facility or
qualified person in order to avoid any hazards.
The appliance can be repaired by qualified staff only.
●
Incorrect repair may cause serious hazard to the user.
In case of any defects, contact an authorised service
facility.
Do not operate the appliance if the rotary strainer is
●
damaged.
Make sure that the lid is locked securely in place before
●
the appliance is switched on.
Never remove the pulp container or unfasten any
●
clamps when the appliance is in operation.
Turn off the device and unplug it before replacing any
●
elements or approaching any moving parts during use.
Always unplug device before cleaning, assembling or
●
disassembling.
EN
