INSTRUCTIONS FOR USE
End of cooking timer
The end of cooking timer, which can be set
from 0 to 120 minutes, programmes the end of
cooking and switches off the oven. To use it,
first you have to turn the knob clockwise by one
notch to the position then, continuing, wind up
the buzzer by further rotating the knob for
almost one complete turn; lastly, going back,
set the desired time.
When the time that has been programmed has lapsed, the buzzer sounds and at
the same time the oven is automatically switched off. To use the oven with the
manual function, excluding the timer, put the knob back to its original position,
rotating it in an anticlockwise direction by one notch until the reference of the knob
coincides with the
symbol on the control panel.
6 button electronic programmer
Setting the current time
When connected electrically, the display flashes
showing 0.00. Press buttons (1) and (2) at the
same time and set the current time, pressing
the (-) and (+) buttons within 4 seconds; the
oven will continue to function manually and can
be used without any programming.
General notes
•
between 10.00 p.m. and 6.00 a.m. the brightness of the display is automatically
reduced.
•
if it is not deactivated (as per the instructions below), the buzzer stops after 2
minutes.
•
any programming described below is activated about 4 seconds after setting.
•
the maximum time of programming is 23 hours 59 minutes.
•
if there is a power cut, all the settings programmed are cancelled; when power
returns, the display flashes showing 0.00. To restore the functioning of the
appliance, reset the current time and any programme.
Timer buzzer
To use it as a simple buzzer, press button (1) and programme the time desired,
pressing the (-) and (+) buttons within 4 seconds; the current time will reappear and
the symbol (B) will be activated. To deactivate the buzzer, press any of the buttons
from (1) to (4); the symbol (B) is deactivated.
A
B
1
2
3
4
8 - ENGLISH
