EN - 22
7 BEFORE CALLING AFTER-SALES SERVICE
Errors
Your fridge will warn you if the temperatures for the cooler and freezer are at improper
levels or if a problem occurs with the appliance. Warning codes are displayed in the freezer
and cooler indicators.
ERROR TYPE
MEANING
WHY
WHAT TO DO
[Sr]
"Failure" Warning
There is/are some
part(s) out of order or
there is a failure in the
cooling process.
The product is plugged
for the first time or
a long-time power
interruption for 1 hour.
Check the door is open or not and check
if the product working 1 hour. If the door
is not open and the product had worked
1 hour, call service for assistance as
soon as possible.
[Sr] – Set
value blink
on freezer set
value screen
Freezer compartment is
not cold enough
This warning especially
appears if there has
been a power failure
for a long period or
when the refrigerator is
operated for the first
time.
1. Use food within a short time period.
Do not freeze foods that has thawed.
2. Set the freezer temperature to colder
values or set the Super Freeze until
the compartment gets to normal
temperature.
3. Do not put fresh food in the appliance
until the fault has cleared.
[Sr] – Set
value Blink
on cooler set
value screen
Refrigerator
compartment is not cold
enough
This warning especially
appears if there has
been a power failure
for a long period or
when the refrigerator is
operated for the first
time. Ideal temperature
for the refrigerator
compartment is +4
o
C.
If you see this warning,
your foods are at risk of
spoiling.
1. Set the refrigerator temperature
to colder values or set the Super
Cooling mode until the compartment
reaches normal temperature.
2. Open the door as little as possible
until the fault clears.
[Sr] – Set
value blink on
freezer and
cooler set
value screen
"Not cold enough"
Warning
It is combination of
"not cool enough"
error for both of the
compartments.
You will see this failure when first
starting the appliance. It will clear
after the compartments reach normal
temperature.
[Sr] – Set
value blink
on cooler set
value screen
Refrigerator
compartment too cold
The food will start to
freeze because the
temperature is too cold.
1. Check if the Super Cooling mode is
switched on.
2. Decrease the refrigerator
temperature values.
"[--]"
"Low voltage" Warning
This is seen when the
power supply becomes
lower than 170 V.
This not a failure. This prevents any
damage to the compressor. This warning
will clear after the voltage reaches the
required level.
If you are experiencing a problem with your
refrigerator, please check the following
before contacting the after-sales service.
Your refrigerator does not operate
Check if:
•
Your fridge is plugged in and switched on
•
The fuse has blown
•
Is the temperature adjustment right?
•
The socket is faulty. To check this, plug
another working appliance into the same
socket.
