ADJ Products, LLC - www.adj.com - Inno Spot LED Instruction Manual Page 2
Inno Spot LED
General Information
Unpacking:
Thank you for purchasing the Inno Spot LED by ADJ
Products, LLC. Every Inno Spot LED has been thoroughly tested and
has been shipped in perfect operating condition. Carefully check the
shipping carton for damage that may have occurred during shipping.
If the carton appears to be damaged, carefully inspect your fixture for
any damage and be sure all equipment necessary to operate the unit
has arrived intact. In the event damage has been found or parts are
missing, please contact our toll free customer support number for fur-
ther instructions. Please do not return this unit to your dealer without
contacting customer support first.
Introduction:
The Inno Spot LED is a ten channel DMX intelligent,
moving head, mini LED fixture. The Inno Spot LED can operate as a
stand alone fixture or in a Master/Slave configuration. The Inno Spot
LED has three operating modes; a sound active, show mode, DMX
controlled. This fixture is suitable for theaters, studios, retail stores,
and other similar locations. For best results use fog or special effects
smoke to enhance the beams projections.
Customer Support:
ADJ Products, LLC provides a toll free cus-
tomer support line, to provide help and to answer any question should
you encounter problems during your set up or initial operation. You
may also visit us on the web at www.adj.com for any comments or
suggestions. Service Hours are Monday through Friday 8:00 a.m. to
4:30 p.m. Pacific Standard Time.
Voice:
(800) 322-6337
Fax:
(323) 582-2941
E-mail:
[email protected]
Warning!
To prevent or reduce the risk of electrical shock or fire, do
not expose this unit to rain or moisture.
Warning!
This may cause severe eye damage. Avoid looking directly
into the light source at all times!
User Instructions
1/13
