ADJ Products, LLC - www.adj.com - Inno Spot LED Instruction Manual Page 11
ADJ Products, LLC - www.adj.com - Inno Spot LED Instruction Manual Page 12
TEST
- This function will run a self test program. The test
program will test pan/tilt movement and colors.
1. Press the MENU button until “
TEST
” is displayed, press ENTER.
2. The fixture will now run a self test.
TEMP
- With this function you can check the temperature
of the fixture.
1. Press the MENU button until “
TEMP
” is displayed, press ENTER.
2. The temperature of the fixture will now be displayed. Press MENU
to exit.
FHRS
- With this function you can display the running
time of the unit.
1. Press the MENU button until “
FHRS
” is displayed, press ENTER.
2. The running time of the fixture will now be displayed. Press MENU
to exit.
VER
- With this function you can display the version soft-
ware of the unit.
1. Press the MENU button until “
VER
” is displayed, press ENTER.
2. The software version will now be displayed. Press MENU to exit.
RSET
- Use this function to reset the unit.
1. Press the MENU button until “
RSET
” is displayed, press ENTER.
2. The fixture will now reset.
Inno Spot LED
System Menu
I TLT -
Tilt Inversion
1. Press the MENU button until “
I TLT
” is displayed, press ENTER.
Either NO or 1 will be displayed.
2. To activate the Tilt inversion press the UP or DOWN buttons until
I
is displayed, press ENTER to confim. To deactivate Tilt inversion,
select No and press Enter.
LED -
With this function you can have the LED display
turn off after 10 seconds.
1. Press the MENU button until “
LED
” is displayed, press ENTER.
2. The display will show either “
ON”
or
“OFF
”. Press the UP or
DOWN buttons to select “
ON
” to keep the LED display on at all
times, or “
OFF
” to switch to have the LED display switch off after 10
seconds.
3. Press ENTER to confirm. To make you LED display reappear again
press any button.
DISP
-
This function will reverse the display 180º.
1. Press the MENU button until “
DISP
” is displayed, press ENTER.
2. Press ENTER to “flip” the display. Press ENTER to “flip” it again.
Press ENTER when you have made your desired setup.
FADJ
- This function will allow you to focus the lens for a
clear LED output.
1. Press the MENU button until “
FADJ
” is displayed, press ENTER.
The fixture will turn a different way each time the ENTER button is
pressed.
2. With the spot pointed at a flat wall or surface, at the distance it will
be set up, you can turn the lens to adjust the clarity. Press MENU to
exit.
Inno Spot LED
System Menu
