EN
page 37
7. MAINTENANCE
7.1 Routine maintenance
WARNING: The machine is not protected against pressurized water jets. Do not use pressure cleaning system
against the machine.
It is recommended to contact the seller of chemicals for proper cleaning instructions, in order to have detailed
indications on methods and products for the correct periodical machine sanitation.
Do not use bleach or chlorine based detergents.
Daily cleaning is needed to ensure that the machine runs perfectly. The following shall be carried out:
• Turn the machine in
STAND-BY
mode, by pressing the push-button
C
of the control panel (see chap.
3
).
• See paragraph
4.5
to drain the wash-tank.
• Remove the surface fi lters and thoroughly clean them under running water.
• Remove the pump fi lter and clean with a brush and a water shower.
• Remove the arms by loosening the fi xing screws, and thoroughly clean them, and the nozzles under running water.
• Reassemble the parts and reposition the wash pipes fi rmly in place. Take extreme care to re-assemble the nozzles in
the right position (open and / or closed nozzles) and that the arms are installed with the right axial angle.
• Clean the tank very carefully, with specifi c cleaning products.
• It is recommended to leave the machine hood open at the end of the day.
Automatic cycle of machine self-cleaning/rinsing:
recommended at each day end.
Turn the machine on
STAND-BY
mode, to drain the tank (see paragraph
4.5
).
Press the blue-fl ashing
A - START
button. A 30” automatic self-cleaning program will run. At the end, the machine will
be in
STAND-BY
mode.
STAND-BY
STAND-BY
STAND-BY
