MEASUREMENT FOUNDATION
1
WINCH
Z 2500
Fig.8:
Wiring Installation diagram
Step 5 - Install the Wiring
Place the supplied terminal boots on wires before
securing to the contactor. All wires must be at-
tached to the contactor before mounting the con-
tactor to the ATV (fig.8).
• Connect red cable one terminal (marked “M+”)
of contactor to terminal positive (+) of the motor .
• Connect black cable one terminal (marked “M-“)
of contactor to terminal negative (-) of the motor .
• Connect red cable one terminal (marked “B+”) of
contactor to terminal positive (+) of the battery.
• Connect black cable one terminal (marked “B-“)
of contactor to terminal negative (-) of the battery.
• If installing both the handle bar switch and the re-
mote socket, first attach the terminals on the green
and black remote socket wires into the contactor
(green to green, black to black), or connect the red
cable of remote socket to the terminal (marked
“B+” ) of the contactor .
