Axiom Line User Guide
15
English
3.1.2 Drawbar Mode
Drawbar mode is a quick method of reversing the direction of the nine sliders on your Axiom 49 or 61. If you are controlling an
instrument that makes use of drawbars rather than faders—the MB-3 electric organ on Key Rig for example—then you should
use drawbar mode.
The Drawbar function is not available on the 25-note version.
Press Data 3 and Chan Assign together to enable Drawbar mode. When Drawbar mode is active, this will be indicated by the
Drawbar symbol in the LCD display.
The status of Drawbar mode can be saved in any of the 20 memory locations. It will also be saved when you power down your
Axiom.
NOTE
: It is possible to reverse the direction of any control on your Axiom 25, 49 or 61, by switching the minimum and maximum
limits for the controller (for example: min=127 and max=0; refer to the previous section for details on how to do this).
3.1.3 Turning Controls OFF
Stop a control from transmitting MIDI data by turning that control OFF. This is done as follows:
49- and 61-note versions:
<
Select the controller as described in section 2.4.2.
<
Press the Ctrl Assign button and enter “000” on the numeric keypad.
<
While the LCD is still flashing, press the data minus (–) button.
<
The LCD will now display OFF.
25-note version:
<
Select the controller using the method described in section 2.4.2.
<
Press the Advanced button.
<
Press the Ctrl Assign key, and enter ‘000’ using the numeric data entry keys.
<
Press Enter to confirm.
<
Press the Advanced button, followed by the Ctrl Assign key again.
<
Press the data minus (-) button
<
The LCD will now display OFF.
<
Press Enter to confirm.
3.2 Recollection and Storage of Your Control Setups
Once you have programmed the controls of your Axiom, you can store your setup into one of the 20 memory locations the Axiom
offers.
The 20 locations are accessed using the Store and Recall buttons. Use the Store button to write your control setups to a memory
location. Use the Recall button to get your control setups back.
To store all of the current control settings on your Axiom:
49- and 61-note versions:
<
Press the Store button.
<
Enter the number of the memory location (1 to 20) using the numeric keypad.
25-note version:
<
Press the Advanced button.
<
Press the Store key.
<
Enter the number of the memory location (1 to 20) using the numeric data entry keys, or the -/+ buttons.
<
Press the Enter key to confirm and overwrite this preset location.
