M-AUDIO Axiom 25 инструкция по эксплуатации онлайн - страница 26


Инструкция M-AUDIO Axiom 25 для устройства MIDI клавиатура содержит страницы на английском языке.

Размер файла: 2.28 MB. Состоит из 51 стр.


Вы можете скачать pdf файл этой инструкции: Скачать PDF


Предыдущая
Следующая
background image

Axiom Line User Guide

25

English

3.6.2 Activating/Deactivating Zones

There are four zones assignable on the 49- and 61-note versions and three zones assignable on the 25-note version.  To activate/
deactivate zones, first press the Zone/Group button which will light. 

To enable/disable any zone:

 

Press the Zone/Group button.  

 

 

On  49-  and  61-note  versions  use  Zone  buttons  1,  2,  3  and  4,  located  beneath  faders  D9  through  D12  to  activate/
deactivate Zones 1-4 respectively.

 

On the 25-note version, press the LOOP, RW and FF buttons to activate/deactivate zones 1-3 respectively.

 

Press the Zone/Group button again to exit.

* When you enable a single zone, the other 2 (or 3) zones are automatically disabled.  To enable multiple zones, press the respective 
zone activate/deactivate buttons at the same time.

The active zones will always be shown on the LCD display 

Zones have a number of parameters associated with them and editing these parameters affects all zones that are currently active 
simultaneously.  Editing the various Zone parameters is described below.

The active/inactive status of each zone can be stored to the 20 memory locations.  You must ensure Group A is activated when 
storing this data since the Zone settings are stored within this group.  Please see section 3.2.1 for more information on Groups.

3.6.3 Zone Channel

If you want to use the Zone feature to control a number of different instruments, you need to set each of the zones to transmit 
on different channels. 

To assign the channel of a zone:

 

49- and 61-note versions:

 

 

 

Press Glob Chan and Zone Range together to access the Zone Channel setting.  The LED in the  Zone/Group 
button lights to indicate that Zone/Group mode is automatically selected.

 

 

 

The LCD displays the current transmit channel for the automatically selected zone and flashes its symbol. Use Zone 
buttons 1 through 4 to select a different zone if necessary. While multiple zones can be active at the same time, only 
the zone with the flashing symbol will be affected by this change. 

 

 

 

Enter the new channel number (00 to 16) using the numeric keypad.  (Please note that assigning the zone to channel 
00, will set the zone to transmit on the Global Channel (see section 2.2)). 

 

 

Once the channel edit is complete, Zone/Group mode exits automatically.

 

 

Repeat to edit the channel settings of the remaining zones. 

 

25-note version:

 

 

Press the Advanced button.

 

 

Press the Zone Chan key

 

 

 

The LCD displays the current transmit channel for the automatically selected zone and flashes its symbol. Use Zone 
buttons 1, 2 or 3 to select a different zone if necessary. While multiple zones can be active at the same time, only 
the zone with the flashing symbol will be affected by this change. Enter the new channel number (00 to 16) using 
the numeric keypad.  (Please note that assigning the zone to channel 00, will set the zone to transmit on the Global 
Channel (see section 2.2).) 

 

 

Press the Enter key to confirm.

 

 

Repeat to edit the channel settings of the remaining zones. 

 

 

 The  transmit  channel  of  each  zone  can  be  stored  to  the  20  memory  locations.   You  must  ensure  that  Group A  is 
activated when storing this data since the Zone settings are stored within this group..  Please see section 3.2.1 for more 
information on Groups.


Что удобнее для чтения книг?

Планшет
Электронная книга
Смартфон
Книга в бумажном переплёте
Не читаю книг

QR код manualbase.ru
©  2010- ManualBase.ru