37
EN
Basic settings
Timer
The timer functions like an egg timer. It can be used at any time and independently of all other functions.
To set the Timer proceed as follows:
1.
Press the “
On/Off
” key to switch the oven on.
2.
Press the “
Timer
” function key
3.
Press the “
–
” and “
+
” keys to set the desired
time.
4. Press the
OK
key. The timer will start to
countdown.
When the set time has elapsed the oven will emit
three beeps that will be repeated every 30
seconds and the
Timer
key will flash. Press the
Timer
key to cancel the beeps.
While the Timer is running the Timer light is on.
The display and lights show the following:
1. If there is no function running the display shows
the Timer counting-down and the Timer key is
red.
2. If there is an active function, the display and
keys show the normal function parameters. To
check the Timer’s remaining time press the
Timer key. The display will briefly show the
Timer and resume the function indications after
5 seconds or once the Timer key is pressed
again. While the Timer is shown the remaining
time can be changed with
the “
–
” and “
+
” keys
as described above.
