8
9
Operation
Operation
General operations
Turning the unit on/off
Press PWR button to turn the unit on. Press
the button again to turn the unit off.
Mode select
Press MOD button repeatedly to select
between Radio, auxiliary input, USB or
Memory Card modes. Modes of operation are
indicated on the display. Memory card and
USB modes are not available unless a memory
card or USB device is connected.
Volume control
Adjust volume by rotating VOLUME knob
(00-42).
Mute function
Press MUT button to switch off the sound;
press it again or rotate VOLUME knob to
resume the sound.
Loudness
Press SELECT button repeatedly until LOUD
ON (OFF) is displayed. Rotate VOLUME knob
to select loudness ON or OFF. Activating this
feature will enhance bass and treble frequencies
when listening to music at low volumes.
Audio parameter setting
Press SELECT button repeatedly to select
a parameter: VOL (volume) => BAS (bass) =>
TRE (treble) => BAL (balance) => FAD (fader).
Rotate VOLUME knob to adjust each mode:
• Bass/Treble: from -10 to 10;
• Balance: L10 (left) to R10 (right);
• Fader: from R10 (rear) to F10 (front).
When DSP is on, bass and treble are
not adjustable.
Preset EQ modes
Press SELECT button repeatedly until EQ
OFF is displayed. Rotate VOLUME knob to
select between FLAT/CLASS/ROCK/POP and
OFF equalizer modes.
Beep function
Press SELECT button repeatedly until BEEP
ON (OFF) is displayed. Rotate VOLUME knob
to select between ON (beep sound is heard
when a button is pressed) and OFF (no sound
is heard when a button is pressed).
Clock
Press and hold PTY/CLK button to display
the time on the screen. Then press and hold
this button again; the time indication will
blink. Press
button to adjust hours; press
button to adjust minutes. To confirm the
adjustment, press PTY/CLK button or leave the
unit idle for several seconds.
Preset volume
Press and hold SELECT button, then press
it until P-VOL is displayed. Rotate VOLUME
regulator to adjust the preset volume level.
This volume level will be active each time you
switch on the unit.
Aux In
AUX-in jack is intended for connecting
an external audio equipment to amplify the
sound. If connection is made correctly, the
audio signal from the external source will be
translated through the acoustics of the head
unit. This enables to adjust the volume and
quality of the sounding. For example, you can
connect an MP3-player to listen to tracks using
the car acoustic system.
Radio operations
Band select
In Radio mode press BND/ID3 button to
select a radio band: FM1, FM2, FM3 and AM1,
AM2. 6 stations can be saved in each band.
Manual/automatical tuning
• Press and hold
/
buttons to display
MANUAL. Now you can press these buttons
repeatedly to adjust the needed frequency
