11
Operation
4
Jazz, Country
Weather,
Finance, Children
5
Nation, Oldies
Social, Religion,
Phone IN
6
Folk
Travel, Leisure,
Document
When PTY is selected, the radio starts to
search corresponding PTY information, and
stops if the corresponding PTY information
is detected. If no buttons are pressed within
several seconds, previously selected PTY is
searched. During 1 loop, if desired PTY is not
found, the unit will return to previous mode.
Press PTY/CLK button to switch the PTY
function off.
Other parameter setting
To choose the corresponding option, press
and hold SELECT button for 2 seconds, then
press it repeatedly until the display shows the
needed option. Turn VOLUME knob to choose
the needed value. After choosing, leave the
unit idle to activate.
TA SEEK/TA ALARM
In TA SEEK mode, the unit will seek for
traffic announcement program when TA button
is pressed; in TA ALARM the unit does not
retune to TA information.
PI SOUND/PI MUTE
PI sound refers to the reception noise
when the AF function tries to scan alternative
frequency.
MASK DPI/MASK ALL
During MASK DPI mode, the unit will mask
only the AF which has different PI, this is the
default mode; during MASK ALL mode, the unit
will mask the AF which has different PI and no
RDS signal with high field strength.
RETUNE S/L - SHORT/LONG
“RETUNE” refers to the time period the
unit allows for radio scan when reception is
interrupted. “S” represents a long time period,
and “L” represents a short time period.
USB/SD/MMC operations
Connecting a USB-device/Memory
card
Insert a USB device into the USB port of
this unit. Or detach the front panel and insert
an SD/MMC memory card until a click into the
memory card slot. To remove the card, press it
until a click, then pull to remove.
USB/SD/MMC supported capacity: up
to 16 Gb.
For correct and satisfactory operation,
licensed SD/MMC memory cards of famous
brands should be used with this unit. Avoid
using memory cards of unknown brands. Some
models of USB devices cannot be supported
by this unit due to incompatibility.
Playback
When a USB or a memory card is first
connected, playback will begin automatically.
Depending on the number of files and folders,
the device may take several seconds to begin
playback. If no MP3/WMA files are detected,
“USB” or “SD” will be displayed.
Track select
• Press
button to skip to the beginning
of the next track. Press
button to skips to
the previous track.
• Press F/PS button; track number will blink
on the display. Rotate VOLUME knob to select
the track number. Press SELECT button to
confirm your selection.
Folder select
Press 5/ - button to select the previous
folder. Press 6/ + button to select the next
folder.
Fast forward/rewind
Press and hold
or
button to rewind
or fast forward the current track.
Pause
Press 1/
button to temporarily stop file
