6
BEFORE USE
Remove all packing materials from the
appliance.
Wipe the housing with a damp lint free
cloth and wash all parts to be in contact with
food.
Rinse the washed parts of the appliance
with clean water and completely dry them
before assembling.
DIRECTIONS FOR USE
Before assembling/dismantling make sure the
appliance is turned off and unplugged.
Assembling
1. Insert the screw
(9)
into the operating unit
(5)
.
2. Put the cross-shaped cutter
(10)
on the end
of the screw
(9)
so that the rounded tip of the cutter
(10)
is
facing the screw
(9)
. Make sure the cross-shaped cutter
(10)
is properly fixed.
3. Place the selected perforated disc
(11)
on top of the cutter
(10).
4. Tighten the seal ring
(12).
5. To attach the operating unit
(5)
to the housing
(1)
press lock
button
(3)
and insert operating unit
(5)
into the opening in the
grinder’s housing, push gently and turn anticlockwise.
6. Place the tray
(6)
on top of the funnel of the operating unit
(5)
. Now the grinder is ready for operation.
Dismantling
1. Press lock button
(3)
,push gently on the operating unit
(5),
turn it clockwise. Remove the operating unit
(5)
from the mo-
tor.
2. Untwist the seal ring
(12)
.
3. Remove the perforated disk
(11)
and cross-shaped cutter
(10)
from the screw
(9).
Remove the screw
(9)
from the operating
unit
(5)
.
Use of the appliance
1. Place the grinder on a dry, smooth flat horizontal surface.
2. Remove the meat from the package. Cut out all bones and
tendons from the meat prior to grinding. Cut the meat into
pieces that will fit easily into the grinder funnel.
3. Assemble the meat grinder and plug it into a power supply
with voltage matching the information on the appliance.
4. Put the meat into the tray
(6).
5. Switch on the appliance using the On/Off/REV button
(2).
6. Gradually push the meat pieces into the funnel using the
pusher
(7).
Do not push too hard.
7. After use switch the appliance off and unplug it from the wall
