INTRODUCTION
GETTING STARTED
WHAT’S IN THE BOX
Packed with your C 446 you will find
•
AM loop antenna
•
FM ribbon-wire antenna with balun
•
Wireless antenna
•
DAB antenna (230V version model only)
•
Detachable mains power cord
•
TNR 2 remote control with 2 AA batteries
•
Quick Start guide
SAVE THE PACKAGING
Please save the box and all of the packaging in which your C 446 arrived.
Should you move or otherwise need to transport your C 446, this is by far
the safest container in which to do so. We’ve seen too many otherwise
perfect components damaged in transit for lack of a proper shipping
carton, so please: Save that box!
CHOOSING A LOCATION
Choose a location that is well ventilated (with at least several inches to both
sides and behind), and that will provide a clear line of sight, within 25 feet/8
meters, between the C 446’s front panel and your primary listening/viewing
position - this will ensure reliable infrared remote control communications.
The C 446 generates a modest amount of heat, but nothing that should
trouble adjacent components. It is especially important that sufficient
ventilation be provided.
RESTORING C 446 TO ITS FACTORY DEFAULT SETTINGS
Sometimes power spikes and drop-outs may from time to time cause some
inadvertent functionality. The procedure below will reset the C 446 to its
factory default settings.
For 120V version model only (AH version)
•
At any Source modes, press and hold front panel [
3
SOURCE] button
first and then followed by the [BACK] button. The VFD shows
For 230V version model only (C version)
•
At any Source modes, press and hold front panel [
3
SOURCE] button
first and then followed by the [SETUP] button. The VFD shows
IMPORTANT NOTES
• The C 446 will automatically go to standby mode after the “reset”
display.
• Restoring the C 446 to its factory default settings will delete all AM,
FM and DAB presets as well as all setup settings done via the “Settings
Menu”.
NOTICE TO EUROPEAN CUSTOMERS
The C 446 may be operated in the following countries:
Armenia
Greece
Portugal
Austria
Hungary
Romania
Belarus
Iceland
Russia
Belgium
Ireland
Serbia & Montenegro
Bulgaria
Italy
Slovakia
Croatia
Latvia
Slovenia
Cyprus
Lithuania
Spain
Czech Republic
Luxembourg
Sweden
Denmark
Macedonia
Switzerland
Estonia
Malta
Turkey
Finland
Moldova
Ukraine
France
The Netherlands
United Kingdom
Georgia
Norway
Germany
Poland
EU COUNTRY RESTRICTION IN 2.4GHZ BAND
This device may be used indoors or outdoors in all countries of the
European Community using the 2.4GHz band: Channel 1-13, except where
noted below.
•
In France, the output power is restricted to 10 mW EIRP when the
product is used outdoors in the band 2454 - 2483.5 MHz. There are no
restrictions when used in other parts of the 2.4 GHz band.
AH Reset...
complete.
C Reset...
complete.
5
ENGLISH
POR
TUGUÊS
FR
ANÇ
AIS
ESP
AÑOL
IT
ALIANO
DEUT
SCH
NEDERL
ANDS
SVENSK
A
РУ
ССКИЙ
