DEFENDER Multicam WF-10HD инструкция по эксплуатации онлайн - страница 5


Инструкция DEFENDER Multicam WF-10HD для устройства веб-камера содержит страницы на русском языке.

Размер файла: 1.53 MB. Состоит из 22 стр.


Вы можете скачать pdf файл этой инструкции: Скачать PDF


Предыдущая
Следующая
background image

www.defender-global.com

5

4 EXTERIOR 

Microphone

Strap Mounting 

Micro USB Slot 

Speaker 

MicroSD Memory 

Card Slot

RECORD Button 

Status Indicator 

Access Point Indicator

Cloud Mode Indicator 

Photo Indicator 

Video Indicator

Power Button 

Mode Button 

Magnetic 

Mount

Support 

Mount 

Strap 

Mounting 

Mounting 

Clip 

5  CHARGING THE DEVICE 

To charge the camera, connect it to the power supply or computer USB port. If the camera was off and the battery was 

completely discharged, it will automatically switch to 

“Charging”

 mode; the camera will automatically shut down when 

charging will be completed. If the camera did not switch to 

“Charging”

 mode automatically, press and hold  button, until 

the camera switches to this mode. While in 

“Charging”

 mode, the Indicator lights at the back panel will sequentially 

flash red, while the status indicator will continuously flash red along with the other lights.

6  TURNING THE DEVICE ON

• 

If the camera is connected to power supply and the indicator lights are not on, then you need to switch the device 

to 

“Charging”

 mode before turning it on (see 

“CHARGING THE DEVICE”

 section)

• 

If the camera is not connected to power supply or is currently in 

“Charging”

 mode, hold   button, until the device 

switches to 

“Access Point”

 mode. While in this mode the device will start a wireless access point that is built into 

the camera and the access point indicator will flash green. When the access point will start and be ready for 

connection, the camera might not respond to button signals or respond with a delay.

Note: Holding the   button for a prolonged period will force shut down the camera.

7  TURNING THE DEVICE OFF

• 

If the camera is connected to power supply, hold the   button until the camera switches to 

“Charging”

 mode (see 

“CHARGING THE DEVICE”

 section)

• 

If the camera is not connected to power supply, hold the   button until the indicator lights go out.

7.1 Automatic shut down

• 

If the camera is currently in 

“Charging”

 mode, then, after charging is complete, the device will automatically shut 

down. 

• 

If the camera is idle for 5 minutes and is using internal battery as main energy source in any mode, except Cloud 

mode, it will shut down automatically.

Note: Video recording and broadcasting video stream never cause the device to become idle.

8  FORCED SHUT DOWN AND RESET

• 

If the camera does not respond or if the camera incorrectly responds to user actions, please, perform force shut 
down. This may be done by holding (3 to 5 seconds)    button, until the indicator lights go out.


Что удобнее для чтения книг?

Планшет
Электронная книга
Смартфон
Книга в бумажном переплёте
Не читаю книг

QR код manualbase.ru
©  2010- ManualBase.ru