6
7
EN
EN
• Unpack the iron and remove any packaging materials
and advertising stickers.
•
If there is a protective film on the soleplate (7),
remove it.
• There may be water residue in the tank (6), as the
iron has undergone factory quality control.
• Keep the original package.
• Read the safety measures and operating
recommendations.
• Check the delivery set.
• Examine the unit for damages, in case of damage do
not plug it into the mains.
•
Make sure that specified specifications of power
supply voltage of the unit correspond to the
specifications of your mains. When using the unit in
the mains with 60 Hz frequency, the unit does not
need any additional settings.
• Clean the iron body and the soleplate with a soft,
slightly damp cloth and then wipe it dry.
WATER SELECTION
•
Use tap water to fill the water tank (6) of the iron.
• If tap water is hard, it is recommended to mix it with
distilled water in proportion 1:1. If tap water is too
hard, mix it with distilled water in proportion 1:2 or
use distilled water only.
FILLING THE WATER TANK
ATTENTION!
Before filling the water tank (6) with water make sure
that the iron is switched off and unplugged.
• Open the water inlet lid (1).
• Pour the water into the water tank (14) and then
close the lid (1).
Notes:
– do not let water go over the «МАХ» mark when filling
the water tank (6);
– if you need to refill the water tank during ironing,
switch the iron off and remove the power plug from the
mains socket.
USING THE IRON
Before using the iron for the first time test the heated
iron on a piece of cloth to be sure that the iron soleplate
(7) and the water tank (6) are clean.
• If the item label is marked with the symbol «
» ,
do not iron the item.
•
Sort items by ironing temperature first: synthetics
with synthetics, wool with wool, cotton with cotton.
• The soleplate (7) heats up faster than it cools down,
that’s why you should start ironing with synthetics,
then increase the temperature and iron silk and wool
items. Cotton and linen items should be ironed last.
• Corduroy and other fabrics that can become glossy
should be ironed backside.
DRY IRONING
• Hold the iron by the handle (4) or place it on a heat-
resistant stand.
• Insert the power plug into the mains socket.
• When the iron soleplate (7) reaches the set
temperature, the indicator will go out and you can
start ironing.
•
After you finish ironing, disconnect the power
plug from the mains socket and wait until the iron
soleplate (7) cools down completely.
Note:
- when switching the unit on for the first time, foreign
smell can appear. It is normal;
- if you are going to iron delicate fabrics after the
soleplate (7) heats up, it is recommended to wait for the
next cycle of the indicator switching off.
STEAM IRONING
• Hold the iron by the handle (4) or place it on a heat-
resistant stand.
• Insert the power plug into the mains socket, the
indicator will light up.
• Insert the power plug into the mains socket.
• Make sure that there is enough water in the water
tank (6).
• When the temperature of the soleplate (7) reaches
the set point, the indicator will go out and you can
start ironing.
• Move the steam supply button (1) lock (3) and press
the button (1), steam will be released from the
soleplate (7) openings. After the operation lock the
steam supply button (1) by moving the lock (3).
• Disconnect the power plug from the mains socket
and wait until the iron soleplate (7) cools down
completely.
ATTENTION!
If steam is not supplied during the operation, check
whether there is water in the water tank (6).
VERTICAL STEAMING
• Hold the iron vertically at the distance of 5-20 cm
from the clothes or interior objects and press the
burst of steam button (2) with 4-5 second intervals,
steam will be released from the soleplate (7)
openings intensively.
ATTENTION!
- To avoid fabric melting, do not touch it with the iron
soleplate (7) while steaming.
- Do not steam clothes on a person. Use a clothes
hanger or a coat rack.
•
After you finish ironing, switch the iron off and
unplug it, wait until the iron soleplate (7) cools down
