38
14.3
Overheating protection
The device has an overheating protection. In case of too high temperature inside the
device close to electronic components the device will switch off automatically. Pull the plug
and let the device cool down at leat for half an hour.
14.4
Commissioning
1. Connect the main plug into a socket. The device beeps and
is flashing in the
display.
2. Unlock & Temperature setting:
Press
to unlock the device.
The display shows „200°C“ and „10 Min“.Press
and then
or
to
increase/decrease the temperature (in 5°C steps) Max.: 200°C, Min.: 60°C.
3. Time setting:
Press
and then
or
to to increase/decrease the time
(in 1 Min. steps). Max.: 60 Min., Min. 1 Min. Start the device with
.
4. Let the device preheat for 3-4 Min. without food or add 3-4 Min. to your cooking time.
5. Pull out the frying basket with the handle and fill it with your desired food.
Please note
► Never fill the basket exceed the amount indicated in the table, as this could affect the
quality of the end result.
6. Slide the pot back into the fryer.
WARNING
► Never use the pot without the basket in it.
7. Fast cooking:
Press
and the device immediately starts frying (Temperature:
200°C, cooking time: 10 Min.). While frying you can still adjust the time and temperature
(see above).
8.
Auto menus:
Press
, the indicator is shown above
. Press
again to
choose a programme.
Symbol
Function
Temp
℃
Time (min)
Remark
Pre-heat*
200
3
Preheat the device when it is cold.
Re-heat**
180
5
To reheat the food when it is cool, adjust
the time if needed.
