21
WEB interface. Otherwise, it will fail to connect VTO.
Be used as an extension VTH.
Press [Master] and switch to “Extension”.
1.
Enter “Room No.” (such as 9901-1) and “Master IP” (IP address of master VTH).
2.
“User Name” and “Password” are the user name and password of master VTH.
Default user name is admin, and the password is the one set during device
initialization.
Click [OK] to save the settings.
3.
Press [Network].
Step 8
The system displays “Network” interface, as shown in Figure 2-14.
Figure 2-14
Add main VTO.
In Figure 2-14
, enter main VTO name, IP address, “User Name” and “Password”.
1.
Switch “Enable Status” to
.
2.
Default device type is “Door Station”. VTO middle no. will be obtained
automatically. The format
is “1+building no.+ unit no. + VTO no.”. Building no.
has 2 digits, unit no. has 1 digit, and no. has 4 digits, so middle no. has 8 digits
in total.
“User Name” and “Password” shall be consistent with WEB login user name
and password of VTO. Otherwise, it will fail to connect.
“Enable Status” of main VTO is “ON” by default. After setting VTO info, please
turn it off and then reboot, in order to put it into effect.
Add sub VTO.
Press
to switch to sub VTO setting interface.
1.
Enter sub VTO name, IP address,
“User Name” and “Password”.
2.
