ENGLISH
en
17
• Mains lead OK?
• Appliance hood correctly closed?
• Has the water sensor cut off? - Empty the
container; then switch on and off again.
• Switch (1) in '
' position? - Set to "I" position.
See section 7.1.
• The vacuum cleaner is not switched on or off by a
power tool, even though switch (1) is set to the '
' position. - Connect the power tool to the
plug socket (2).
Do not interfere with the appliance.
Contact an authorised workshop or
Metabo's after-sales service department (see
section on 13. Repairs).
f
Use only genuine Metabo accessories.
If you need any accessories, check with your
dealer.
See page 4.
A Fleece filter bags
5 bags = 1 set
B PE filter bags
5 bags = 1 set
C Pleated filter
D Suction hose
E Suction nozzle
F Floor nozzle (metal fitting)
G Universal nozzle
H Universal brush
I Upholstery brush
J Crevice nozzle
K Rubber nozzle
L Floor nozzle set (with floor piece and wet vacu-
uming piece)
M Multipurpose nozzle
Repairs to appliances must be carried out by quali-
fied electricians only!
Use only original Metabo spare parts.
If you have Metabo electrical tools that require
repairs, please contact your Metabo service centre.
For addresses see www.metabo.com.
You can download spare parts lists from
www.metabo.com.
Metabo packaging can be 100% recycled.
Worn out appliances and accessories contain large
amounts of valuable raw materials and plastics,
which can also be recycled.
These instructions are printed on chlorine-free
bleached paper.
For EU countries only: Never dispose of
appliances in your household waste! In
accordance with European Guideline 2002/
96/EC on used electronic and electric equipment
and its implementation in national legal systems,
used power tools must be collected separately and
returned for environmentally compatible recycling.
Explanatory notes on the specifications on page 2.
Changes due to technological progress reserved.
K
= Dust class As per EN 60335-2-69.
A
= Outer dimensions
U
= Mains voltage
F
= Mains frequency
I
= Current consumption
N
= Mains connection lead
P
1
= Nominal power input
p
U1
= Max. vacuum (at hose)
p
U2
= Max. vacuum (at blower)
V
l/s1
= Max. volume flow (at hose)
V
l/s2
= Max. volume flow (at blower)
D
max1
= Max. flow rate (at hose)
D
max2
= Max. flow rate (at blower)
V
= Max. container volume
m
= Weight (without mains cable)
A-effective perceived sound levels:
L
pA
= Sound pressure level
L
WA
= Acoustic power level
During operation the noise level can exceed
80 dB(A).
Wear ear protectors!
Measured values determined in conformity with
EN 60704.
~
Alternating current
The technical specifications quoted are subject to
tolerances (in compliance with the relevant valid
standards).
12. Accessories
13. Repairs
14. Environmental Protection
15. Technical specifications
