- 12 -
sélectionné à l’aide de la touche (
+
).
Une fois que le foyer a atteint la température sélectionnée, la
fonction “
Heat up
” se désactive automatiquement et un
BIP
retentit. Le foyer fonctionnera alors de façon stable au niveau
de puissance sélectionné.
Minuterie:
Selon le modèle, la table peut être équipée de la fonction
MINUTERIE.
Cette fonction permet de fixer une durée (de 00 à 99
minutes) au bout de laquelle le foyer sélectionné s’éteint
automatiquement.
Fonctionnement:
- Une pression de la touche “
+
” ou “
-
”
de la fonction
H
fait
apparaître
00
sur l'écran de la minuterie.
Programmer la durée souhaitée à l'aide de la touche
H
“
+
”
ou “
-
”.
- Pour activer la programmation rapide de la minuterie,
appuyer au moins 2 secondes de suite sur la touche
H
“
+
” ou
“
-
”.
- Sélectionner le foyer et programmer la température
souhaitée de 1 à 9 à l'aide des touches “
+
” (
D1
) ou “
-
” (
E1
).
- Pendant le fonctionnement de la minuterie, l'afficheur de la
plaque affichera à tour de rôle le symbole et le niveau de
puissance sélectionné Ex.4.
Attention:
si le symbole reste allumé au fixe, c'est que la
minuterie n'a pas été activée, il faut alors refaire l'opération.
- Le niveau de puissance de la plaque peut être modifié même
si la fonction Minuterie est activée, il suffit d'appuyer sur la
touche “
+
” (
D1
) ou “
-
” (
E1
).
- Dès expiration du temps programmé, la plaque s'éteint.
Ceci sera signalé par le clignotement de l'écran
G
et par un
signal sonore (bip) de 2 minutes environ. Pour désactiver ce
dernier, appuyer sur une touche de sélection quelconque de
la Minuterie (Timer)
H
(
+
ou
-
) ou de la plaque
D1
-
E1
(
+
ou
-
).
- Pour stopper la fonction
MINUTERIE
(TIMER) avant expiration
de la durée sélectionnée, appuyer simultanément sur les
touches
H
“
+
” et “
-
” pendant 2 secondes environ.
NOUS DECLINONS TOUTE RESPONSABILITÉ POUR LES
EVENTUELS DÉGATS PROVOQUÉS PAR L'INOBSERVATION
DES SUSDITES INSTRUCTIONS.
ENGLISH
GB
GENERAL
Carefully read the contents of this leaflet since it provides
important instructions regarding safety of installation, use
and maintenance.
Keep the leaflet for possible future consultation. All the
operations relating to installation/replacement (electrical
connections) must be carried out by specialised personnel
in conformity with the regulations in force.
SAFETY WARNINGS
It is recommended to use flat-bottom pans with a diameter
equal to or slightly larger than that of the heated area. Do not
use pans with a rough base to prevent scratching the heat
surface of the cooktop (Fig.2).
This appliance is not suitable for use by children or persons
requiring supervision. Do not let children play with the
appliance.
Important:
- Avoid spilling liquid, therefore to boil or heat liquids, reduce
the heat.
- Do not leave the heating elements on with empty pots and
pans or without receptacles.
- When you have finished cooking, switch off the relevant
heating element with the control indicated below.
Attention:
- Steam cleaners must not be used.
- If the surface is cracked, switch off the appliance to
prevent electric shock.
- This appliance is not intended for use by young children
or infirm persons without supervision.
- Young children should be supervised to ensure they do
not play with the appliance.
- The appliance is not intended to be operated by means
of external timer or separated remote-control system.
This appliance conforms to the European Directive EC/2002/96,
Waste Electrical and Electronic Equipment (WEEE). By making
sure that this appliance is disposed of in a suitable manner,
the user is helping to prevent potential damage to the
environment or to public health.
The symbol on the product or on the accompanying
paperwork indicates that the appliance should not be
treated as domestic waste, but should be delivered to a
suitable electric and electronic appliance recycling collection
point. Follow local guidelines when disposing of waste. For
more information on the treatment, re-use and recycling of
this product, please contact your local authority, domestic
waste collection service or the shop where the appliance was
purchased.
INSTALLATION INSTRUCTIONS
These instructions address specialised installers and serve
as a guide for installation, adjustment and maintenance in
conformity with the laws and regulations in force. If a built-
in oven or any other appliance that generates heat must
be fitted directly under the glass-ceramic cooktop, THIS
APPLIANCE (oven) AND THE GLASS-CERAMIC COOKTOP
MUST BE SUITABLY INSULATED in such a way that the heat
generated by the oven, measured on the bottom right of
the cooktop, does not exceed 60°C. Failure to respect this
precaution may determine improper functioning of the
TOUCHCONTROL system.
Positioning (Fig.1):
The domestic appliance is designed to be built into a worktop
as illustrated in the specific figure. Apply sealant around
the entire perimeter (cut-out dimensions Fig.1B). Fix the
domestic appliance on the worktop by means of the 4 brackets
provided, taking the thickness of the worktop into account
(Fig.1A). If the lower part of the appliance, after installation, is
accessible via the lower part of the cabinet then it is necessary
to mount a separator panel respecting the distances indicated
(Fig.1C). If the appliance is installed with an oven underneath
then the separator is not necessary.
Electrical connections:
Before making the electrical connections, check that:
- the ground cable is 2cm longer than the other cables;
- the system ratings meet the ratings indicated on the
