WIRELESS WEATHER STATION VT-3533 SR
DESCRIPTION
Main unit
1.
«DOWN» button
2.
«UP» button
3.
«SET» button
4.
«ALARM» button
5.
«CHANNEL» button
6.
«SNOOZE-LIGHT» button
7.
Battery compartment lid
8.
Flap stand
9.
Sensor wall mounting holes
Display
10.
Date field
11.
Week day and current Moon phase field
12.
Weather symbols field
13.
Temperature and humidity integrated sensor indication
«
in
»
14.
Temperature and humidity remote sensor indication «
out
»
15.
Current time indication
Remote sensor
16.
Sensor
17.
Display
18.
Sensor wall mounting hole
19.
Battery compartment lid
20.
Stand
21.
Temperature measurement unit selection buttons «°C/°F»
22.
Transmission channel number selection button «CH»
23.
Wired temperature sensor
SAFETY MEASURES
Before using the unit, read this instruction manual carefully and
keep it for future reference.
Use the unit for intended purposes only, as specified in this
manual. Mishandling the unit can lead to its breakage and
cause harm to the user or damage to his/her property.
•
Do not subject the unit to impacts (dust and moisture are
also to be avoided), as it can lead to failures, reduction
of service life, battery damage and to deformation of the
unit body parts.
•
Provide that no liquid gets inside the unit body. To prevent
the unit’s damage, do not expose the it to rain or moisture,
do not place the unit in places with high humidity (near
bathtubs, containers filled with water, kitchen sinks, wash-
ing machines, near a swimming pool, in wet basements,
etc.). Protect the unit from dripping and splashing.
•
The unit should not be placed near heat sources such as
radiators, electric heaters, stoves or in places exposed
to direct sunlight, excessive dust, vibration or mechani-
cal shocks.
•
Install the unit on flat stable surface in places with proper
ventilation. Do not block the unit ventilation openings.
•
Make sure that the wired sensor is not bent or pinched.
•
Do not let foreign objects get into unit openings.
•
Do not repair the unit or make any changes in it by your-
self. If you find any damages, switch the unit off by remov-
ing the batteries from the battery compartment and apply
to the authorized service center.
•
If you disassemble the unit, it will lead to warranty cancel-
lation. No parts inside the unit require the user’s attention.
•
Do not allow children to use the unit as a toy.
•
This unit is not intended for usage by children under 8
years of age.
•
Children aged 8 and over as well as disabled persons can
use this unit only under supervision of a person who is
responsible for their safety, if they are given all the neces-
sary and understandable instructions concerning the safe
usage of the unit and information about danger that can be
caused by its improper usage.
•
To avoid damages, transport the unit in original pack-
age only.
•
For children safety reasons do not leave polyethylene
bags, used as a packaging, unattended.
•
Attention!
Do not allow children to play with polyethylene
bags or packaging film.
Danger of suffocation!
•
Do not use abrasives or substances causing damages
of the body and the inner parts of the units for cleaning.
•
Keep the unit out of reach of children.
THE UNIT IS INTENDED FOR HOUSEHOLD USAGE ONLY
BEFORE THE FIRST USE
After unit transportation or storage at low temperature
it is necessary to keep it for at least two hours at room
temperature.
–
Unpack the unit, remove any stickers that can prevent
unit operation.
–
Check the unit for damages. In case of damages do not
switch the unit on.
BATTERY INSTALLATION
Attention!
Batteries leakage can cause injuries or the unit damage. To avoid
damages, follow the recommendations specified below:
•
insert batteries following the polarity;
•
use only new batteries of the type specified in the instruc-
tion manual;
•
do not insert the batteries of different types, new batter-
ies with old ones, batteries of different brands as well as
rechargeable batteries of different capacity;
•
remove the batteries if you are not planning to use the
unit for a long time;
•
do not dismantle the batteries, do not subject them to
high temperatures;
•
replace the batteries in time.
Notes
:
•
If the batteries are already installed into the bat-
tery compartment you need to remove the isolation
insert.
Long operation under low or high temperatures
can reduce the voltage of the batteries of the sensor (16),
thus decreasing the sensor’s transmission range.
•
The symbol
indicates that the batteries are dis-
charged, replace the batteries.
Remote sensor
–
Shift the battery compartment lid (19). Insert two “AAA”
batteries (included), strictly following the polarity.
–
Select the temperature measurement units by pressing
the
C/°F
button (21). The selected measurement units are
shown on the display (17).
–
Select the transmission channel number (from 1 to 3) by
pressing the
CH
button (22) repeatedly.
–
Install the battery compartment lid (19) back to its place.
Main unit
–
Remove the battery compartment lid (7) and insert three
“AA” batteries (included), strictly following the polarity.
–
Install the battery compartment lid (7) back to its place.
UNIT INSTALLATION
–
Use the flap stand (8) to set the main unit on a flat stable
surface, use the stand (20) for the remote sensor (16).
–
You can also hang up the main unit and the sensor (16)
on the wall by using the holes (9) and (18), respectively.
–
Place the remote sensor (16) outdoors so that it is not
exposed to direct sunlight, rain or snow. The remote sen-
sor should be installed up to 30 meters away from the
main unit in the line of sight. The distance from the main
unit and the remote sensor to any interference sources
(such as computers, television receivers etc.) should be
at least 1,5-2 meters.
–
Do not place the unit near metal frames, do not use appli-
ances (for example, headphones) operating at the same
frequency (433 MHz) near the weather station.
–
The remote sensor (16) operates within the temperature
range from –40°C to +60°C. If the outdoor temperature is
below -20 °C or if the remote sensor (16) can’t be installed
outside, set it indoors and install the wired sensor (23) out-
side. In this case outdoor temperature and indoor humid-
ity (at the remote sensor installation point) are displayed
in the field (14).
Note:
Make sure that the wired sensor (23) is not bent or
pinched.
DATE AND TIME SETTING
Notes:
The available languages for week day indication: English (EN),
German (GE), Italian (IT), French (FR), Dutch (NE), Spanish
(ES) and Danish (DA).
If the buttons (1)
DOWN
and (2)
UP
are not pressed within
30 seconds during the setting process, the unit will be switched
to the current time mode without saving the new settings.
–
Press and hold down the
SET
button (3) for 2 seconds, the
year numerical value
(Yr)
will start flashing in the field (15).
–
Use the buttons (1)
DOWN
and (2)
UP
to set the required
year.
–
Press the
SET
button (3), the month numerical value
(MONTH)
will be flashing in the field (10).
–
Use the buttons (1)
DOWN
and (2)
UP
to set the required
month.
–
Press the
SET
button (3), the day numerical value (DATE)
will be flashing in the field (10).
–
Use the buttons (1)
DOWN
and (2)
UP
to set the day.
–
Press the
SET
button (3), the language symbol used for
week day indication will be flashing in the field (11).
–
Use the buttons (1)
DOWN
and (2)
UP
to set the language
for week day indication (for example, English).
–
Press the
SET
button (3), the time indication format sym-
bols (12 hour format or 24 hour format) will be flashing
in the field (15).
–
Use the buttons (1)
DOWN
and (2)
UP
to select the time
indication format.
–
Press the
SET
button (3), the hour digits will be flashing
in the field (15).
–
Use the buttons (1)
DOWN
and (2)
UP
to set time in
hours. To set the afternoon time in the 12 hour format,
press the buttons (1)
DOWN
and (2)
UP
until the symbol
«PM» appears.
–
Press the
SET
button (3), the minute digits will be flashing.
–
Use the buttons (1)
DOWN
and (2)
UP
to set the time
in minutes.
–
To save the settings, press the
SET
button (3).
–
After the date is set, the day of week and the Moon phase
corresponding to this date will be displayed in the field
(11). See the symbols interpretation below.
DAYS OF WEEK
Day of
week/
lan-
guage
Eng-
lish
(EN)
Ger-
man
(GE)
Ital-
ian
(IT)
French
(FR)
Dutch
(NE)
Span-
ish
(ES)
Danish
(DA)
Mo.
MO
MO
LU
LU
MA
LU
MA
Tu.
TU
DI
MA
MA
DI
MA
TI
We
WE
MI
ME
ME
WO
MI
ON
Th.
TH
DO
GI
JE
DO
JU
TO
Fr.
FR
FR
VE
VE
VR
VI
FR
Sa.
SA
SA
SA
SA
ZA
SA
LO
Su.
SU
SO
DO
DI
ZO
DO
SO
2
3
THE MOON PHASES
new Moon
full Moon
young Moon
waning Moon
waxing half Moon
waning half Moon
waxing Moon
old Moon
ALARM SETTING
Note:
If the buttons (1)
DOWN
and (2)
UP
are not pressed
within 30 seconds during the setting process, the unit will be
switched to the current time mode.
–
To set the alarm, press and hold down the
ALARM
but-
ton (4) for 2 seconds, the alarm hour digits will be flash-
ing in the field (15).
–
Use the buttons (1)
DOWN
and (2)
UP
to set the alarm
time in hours.
–
Press the
ALARM
button (4), the alarm minute digits will
start flashing in the field (15).
–
Use the buttons (1)
DOWN
and (2)
UP
to set the alarm
time in minutes.
–
To save the settings, press the
ALARM
button (4).
–
To switch the alarm on/off, press the
SET
button (3) while
in the current time mode. If the alarm is on, the symbol
appears in the field (15).
–
To view the alarm settings, press the
ALARM
button (4)
while in the current time mode. The symbol «AL» and the
alarm time will be displayed for 30 seconds in the field
(15). For a quick return to the current time mode, press the
ALARM
button (4) again.
Repeating alarm signal
–
The alarm signal will sound for 2 minutes if you do not
press any buttons.
–
You can switch the alarm signal off for 5 minutes by press-
ing the «SNOOZE/LIGHT» button (6). The symbol «Zz»
will appear on the display, the signal will be repeated
in 5 minutes.
–
To switch the alarm signal off, press any other button.
DISPLAY BACKLIGHT
To switch the display backlight on, press the «SNOOZE/LIGHT»
button (6). The backlight will be on for 20 seconds.
TEMPERATURE AND HUMIDITY MEASUREMENT
–
The integrated thermometer of the main unit is used
for indoor temperature measurement within the range
from 0 °C to +50°C and the remote sensor (16) operates
outdoors at the temperature from -40°C to +60°C. The
humidity meters (of the main unit and the remote sen-
sor) operate within the relative humidity range from 20%
to 90%. If the temperature and humidity values are below
the specified range, the symbols «LL» will be shown in the
corresponding field.
–
Indoor temperature and humidity data are displayed in the
field (13)
«in»
. Outdoor temperature and humidity values
are displayed in the field (14)
«out»
.
–
Temperature and humidity are measured every 30 sec-
onds by the main unit and minutely by the remote sensor
(16). The data are updated automatically.
–
Temperature trends are indicated with arrows (tempera-
ture increases, temperature remains constant, tempera-
ture decreases) in the field (13) and (14).
–
Temperature and humidity data are used for evaluat-
ing of the comfort level that is indicated by one of the
three symbols:
“Favorable” – optimal temperature and humidity
values;
“Arid” – indoor humidity level is lower than optimal;
“Damp” – indoor humidity level is higher than optimal.
Temperature measurement unit selection
To select the measurement units (Celsius degrees or
Fahrenheit degrees), press the
DOWN
button (1).
Remote sensor data transmission
When the batteries are inserted in the remote sensor (16), it
will start data transmission.
–
After you set the batteries in the main unit, select the
transmission channel number. To do so, press the
CHANNEL
button (5) repeatedly. The main unit channel
number should match the channel number on the remote
sensor display (17).
–
The signal search takes about 3 minutes. Data obtained
from the remote sensor (16) will be shown in the field
(14) «
out
».
–
If there is no remote sensor signal, the symbols «- -.-» will
be shown in the field (14)
«out».
–
To start a new channel search, press and hold down the
CHANNEL
button (5) for 2 seconds.
Note:
You can connect the unit with two additional sensors
transmitting on the frequency of 433 MHz. To do so every
sensor should be assigned with its own channel number
(from 1 to 3). To view data from different sensors, press
the
CHANNEL
button (5) repeatedly. If the sensor does
not support the humidity measurement function, the sym-
bols «LL» will be shown in the field (14)
«out»
in humidity
values.
Memory function
The unit memory stores data on maximal and minimal
temperature and relative humidity values.
–
Press the
UP
button (2) repeatedly to view:
•
the maximal temperature and humidity values (the sym-
bol
«MAX»
in the corresponding field),
•
the minimal values (the symbol
«MIN»
),
•
current values.
–
To clear the unit memory, press and hold down the
UP
button (2) for 2 seconds while the unit is in the maximal or
minimal value displaying mode.
Warning signal of temperature change
If the outdoor temperature is out of the range preset by you,
the unit will give a tone signal.
–
To switch the warning signal on or off, press and hold the
DOWN
button (2) for 2 seconds, the values in the field (14)
will be flashing. By pressing the
DOWN
button (1) repeat-
edly, switch the warning signal on and off:
Off
– the signal
is off,
on
– the signal is on.
–
Press the
SET
button (3), the symbol
▲
(upper limit of the
temperature range) will appear in the field (14).
–
Use the buttons (1)
DOWN
and (2)
UP
to set the upper
limit of the temperature range.
–
Press the
SET
button (3), the symbol
▼
(lower limit of the
temperature range) will appear in the field (14).
–
Use the buttons (1)
DOWN
and (2)
UP
to set the lower limit
of the temperature range.
–
To save the settings, press the
SET
button (3).
–
When the temperature is out of the preset range, you will
hear a tone signal. The signal will sound every minute
for 5 seconds until the outdoor temperature is within the
preset range.
–
To switch the signal off, press and hold the
DOWN
button (1), then press the
DOWN
button (1) until the
symbol
«Off»
appears. Then press the
SET
button
(3) thrice.
Weather forecast
The following symbols indicating the weather conditions
(depending on the temperature and humidity data obtained
from the remote transmitter) are shown on the display:
sunny
partly cloudy
cloudy
rain
At the first switching-on, cloudy weather will be displayed.
For weather indication the transmitter in channel 1 will
be used.
If no transmitter is connected to channel 1, cloudy weather will
be always displayed.
If there is no humidity data in channel 1, cloudy weather will
be always displayed.
CLEANING AND CARE
–
Switch the unit off before cleaning by removing the bat-
teries from the battery compartment of the main unit and
the remote sensor.
–
Use a soft cloth to clean the unit.
–
Do not use liquid or aerosol detergents to clean the unit.
STORAGE
–
Unplug and clean the unit before taking it away for
storage.
–
Wind the wired temperature sensor (23). Do not wind the
sensor wire around the unit.
–
Keep the unit away from children in a dry cool place.
DELIVERY SET
Weather station main unit – 1 pc.
Remote sensor – 1 pc.
«AAA» batteries – 2 pcs.
«AA» batteries – 3 pcs.
Instruction manual – 1 pc.
TECHNICAL SPECIFICATIONS
Measurements
Main unit
From 0°C to + 50°C
Remote sensor
From –40°C to + 60°C
Temperature measurement
precision
0.1°C
Relative humidity
measurement
from 20% to 90%
Relative humidity
measurement precision
1%
Remote sensor data transmission
Data transmission frequency
433 mHz
Number of sensors connected 3
Transmission range
Maximum 30 m
Power supply
Main unit
3 « AA » type batteries, 1,5 V
Remote sensor
2 « AAA » type batteries 1,5 V
The manufacturer preserves the right to change the specifica-
tions of the unit without a preliminary notification
Unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can be obtained from
the dealer from whom the appliance was purchased. The bill
of sale or receipt must be produced when making any claim
under the terms of this guarantee.
This product conforms to the EMC-Requirements
as laid down by the Council Directive 2004/108/ЕС
and to the Low Voltage Regulation (2006/95/ЕС)
ENGLISH
VT-3533.indd 1
26.06.2014 12:33:09
