9
Installation
Rackmounting the B004-2DUA4-K
1
Attach the rackmount brackets to the B004-2DUA4-K using the supplied screws.
2
Fasten the rackmount brackets to the rack with user-supplied screws.
Standard Installation
Refer to the following steps and diagram to set up your KVM switch installation.
Notes:
1. Before making any connections, make sure that power to all devices being connected to the KVM switch is
turned off. Unplug the power cords of any computers that have the Keyboard Power On function.
2. The diagram below shows the B004-2DUA4-K installation. Installation for the B004-2DUA2-K is the same
except there are fewer ports.
1 2
4
4 4
4
10
5
5
3
1
Connect a monitor to the DVI console A port on the back panel of the KVM switch.
2
Connect a monitor to the DVI console B port on the back panel of the KVM switch.
3
Connect a USB keyboard and mouse to the corresponding USB keyboard and
mouse console ports on the back of the KVM switch.
4
Optional –
Connect your microphone and speakers to the corresponding 3.5 mm
Mini Stereo console jacks on the front panel or the back panel. The jacks on the
front panel of the unit will take priority over those on the back panel.
5
Optional –
Connect your USB device(s) to the USB 2.0 hub port(s) on the front and
back of the KVM switch.
6
Connect the end of the KVM Cable Kit that includes the USB Type B Male connector
to an available set of computer ports on the back panel of the unit. Connect the
DVI connector to the DVI A port, and the USB and 3.5 mm connectors to the
corresponding USB and 3.5 mm ports.
8
6 7
15-08-306 93-3242-EN.indd 9
9/3/2015 1:30:38 PM