7.
Electric convector
EN
8. Always disconnect unit from the electric plug when not in use.
9. Device is equipped with a standard plug grounding prong. The plug must fit standard European
wall socket. If the plug does not fit in outlet or included tight, turn it vertically 180 degrees and
repeat try. If after that you can not easily insert the plug into the outlet, call electrician to replace
the outlet. Never use the appliance if the plug is inserted into outlet is not until the end.
10. Never connect the appliance to the plug, if the surface is wet.
11. Never use the device in a situation where it may come into contact with water.
12. When the unit is operating, do not touch the surface and the surface of the control block with
wet hands and any body parts.
13. Do not switch on the unit if the power cord or plug are damaged. To avoid the risk of electric
shock, damaged power cord must be changed only at authorized service centers.
14. Never try to repair the unit yourself. This can cause damage to your health and affect the
warranty of the device.
15. Convector should not be used in open spaces or outdoors.
16. Forbidden to install and use the device in bathrooms, showers or pools, in those places where
there is a risk of direct contact with the jets and drops of water on the surface.
17. Do not route the power cord under carpets or pieces of furniture.
18. Never pull the cord and do not unplug the plug abruptly.
19. Do not insert your fingers and not put any objects in air outlet or air inlet as it may cause elec
-
tric shock or damage to the convector.
20. To prevent a possible fire, do not block air inlet and outlet. Do not hang or dry things on the
convector. Use convector on a level surface only.
21. Do not use the convector in areas of use or storage of gasoline, paint or other flammable
liquids.
22. Use convector only as described in this manual. Any other use not recommended by the man-
ufacturer and may cause fire, electric shock or injury to persons.
23. Do not attempt to clean the convector when plugged into an outlet. Not allow convector im-
merse in water. Never pull the power cord.
24. To avoid overheating and the risk of fire and damage internal electrical network, do not change
the length of the power cord and do not connect device through an electrical extenders. However,
you can use an extension if its parameters correspond to the performance of the device and if it is
not used by other power consumers.
25. For normal operation of the device power voltage level must be sufficient, and its technical
parameters must be in strict accordance with technical data given on the unit. If necessary, ask
network provider for characteristics of their electricity.
26. Install and operate the appliance in upright position. Prohibited to operate the device in a
horizontal or inclined positions.
27. The device must be installed so that the panel could not be available for a person who is direct-
ly in the bathroom (in contact with water) or take a shower.
28. Do not install the unit directly under the wall outlet or allow the hot air from the outlet touch
power cord. This can cause them to overheat , creating an emergency situation.
29. The device is not intended for use by persons (including children) with reduced physical, senso-
ry or mental capabilities, with insufficient experience and knowledge, unless they are under super
-
vision and have not received instructions on the use of appliance by a person responsible for their
safety. Necessary to make sure that children do not play with convector.
IMPORTANT SAFEGUARDS
•
Please read all the instruction manual before use and save it for future references.
• Before first switching on check that the voltage indicated on the rating label corresponds with
the mains voltage in your home.
•
For home use only. Do not use for industrial purposes. Use the appliance only for its intended
use.
