Note: If the lamp stops working during the guarantee period, do not attempt to replace it yourself, but contact the Consumer Care Centre to have the
appliance replaced.
Environment
Do not throw away the appliance with the normal household waste at the end of its life, but hand it in at an official collection point for
recycling. By doing this, you help to preserve the environment (Fig. 14).
guarantee & service
If you need service or information or if you have a problem, please visit the Philips website at
www.philips.com
or contact the Philips Consumer
Care Centre in your country (you find its phone number in the worldwide guarantee leaflet). If there is no Consumer Care Centre in your
country, go to your local Philips dealer.
troubleshooting
If the appliance does not work or does not work properly, first check the list below. If the problem is not mentioned in this list, the appliance
probably has a defect. In that case we advise you to contact the Philips Consumer Care Centre.
Problem
Cause
Solution
The appliance does not go on.
The plug may not be inserted properly into
the wall socket.
Insert the plug properly into the wall socket.
There may be a power failure.
Check if the power supply works by connecting another
appliance.
The lamp may be defective.
Contact the Philips Consumer Care Centre.
The mains cord of the appliance may be
damaged.
Check the mains cord. If the mains cord is damaged, you must
have it replaced by Philips, a service centre authorised by
Philips or similarly qualified persons in order to avoid a hazard.
specifications
Model
HP3621
Rated voltage (V) Hong Kong/Singapore/Europe
230
Rated voltage (V) China/Korea
220
Rated voltage (V) Malaysia
240
Rated voltage (V) Taiwan
110
Rated frequency (Hz) Hong Kong/Singapore/Europe
50/60
Rated frequency (Hz) China/Malaysia
50
Rated frequency (Hz) Korea/Taiwan
60
Rated input (W)
200
Class
II
Classification
not classified
Ingress of water
IPX0
IR type
IR-A/B/C
Irradiance (W/m²)
approx. 850
Field dimensions (in cm²)
30x20
Battery type
not applicable
Operation conditions
Temperature
from +10°C to +35°C
Relative humidity
from 30% to 90%
Storage conditions
Temperature
from -20°C to +50°C
Relative humidity
from 30% to 90% (no condensation)
Circuit diagrams, component part lists and other technical descriptions are available on request.
As user of this appliance, you should take measures to prevent the occurrence of electromagnetic interference or other types of interference
between this appliance and other appliances.
-
EnglisH
6
