6
EN
• Wipe the unit with a clean, slightly damp cloth to
remove dust, and then wipe it dry.
• Unwind the power cord to its full length while using
the unit.
USING THE HAIRDRYER
• Make sure that the operation mode switch (1) is set
to the position «0».
• Unwind the power cord completely.
• Insert the power plug into the mains socket.
•
Use the switch (1) to set the required operation
mode:
-
«0» — the hot air styler is switched off;
-
«1» — warm air supply;
- «2» — hot air supply.
• The button (2) is the cool shot function « », press
and hold down the «cool» shot button for fixing your
hairstyle.
•
Note:
— during the first operation a foreign smell
and a small amount of smoke can appear from the
heating element, this is normal and it is not covered
by warranty.
•
– After unit operation, switch the hairdryer off by
setting the switch (1) to the position «0», and unplug
it.
NOZZLE
• Use the nozzle (3) when you need to focus the power
of drying on a small area (for example, a curl or a
wave) or when you want to straighten wavy hair.
• Attach the nozzle (3) to the unit body. The nozzle (3)
allows directing a narrow air flow of high intensity at a
definite hair lock.
• Insert the power plug into the mains socket. Use the
switch (1) to set the necessary operation mode.
•
When the desired effect is achieved, press the cool
shot button (3) and fix your hairstyle.
• Periodically straighten the power cord if it gets
twisted during operation.
OVERHEATING PROTECTION
•
Overheating protection switches the hairdryer off if
the outgoing air is too hot.
•
If the hot air styler is switched off during operation,
set the switch (1) to the position «0», unplug the
unit and make sure that the air inlets and outlets are
unblocked.
• Let the unit cool down for 5-10 minutes and switch it
on again. Do not block the air inlets during operation
of the hot air styler and
• avoid getting of hair into the air inlet grid (5).
CLEANING AND MAINTENANCE
• The hairdryer is intended for household use only.
• Set the switch (1) to the «0» position, disconnect the
hairdryer from the mains and let it cool down.
• Wipe the unit body (4) with a slightly damp cloth, and
then wipe it dry.
