4
INSTRUCTION MANUAL
BASIC MIXER ELEMENTS
A- mixer casing
B- handle
C- speed select switch
D- nozzles / headpieces extraction button
E- set of whisks
F- electric cord
G- set of nozzles / headpieces for thick products
PERFORMANCE SPECIFICATIONS
Voltage:
230V~ 50Hz
Rated power:
200 W
Run time / Continuous work time: not more than 5 minutes
Service life:
5000 cycles
The date of production represented in the serial number: the third month of the
fourth digit of production, the fifth year of production (2010 to 2019). Example:
хх120ххххххх - 12 month, 2010.
MIXER OPERATION
1. Connect the required set of nozzles to the mixer, making sure in advance
that switch “C” of the mixer is set at “0”. The mixer should be off the line.
2. Plug in the mixer. Hold the plugged-in mixer only by the handle.
3. Immerse the nozzles in the mixed liquid prepared in advance. Prevent contact
of the mixed liquid with the mixer casing.
4. Set the speed select switch at the required speed.
5. The mixer can work without interruption at the minimum speed for
approximately 10 minutes, at the maximum speed – for 5 minutes.
6. After use, set switch «C» at “0” position, and then unplug the mixer.
7. In order to extract the nozzles, press special “D” button.
Please mind the fact that the mixer is equipped with nozzles interlock system
BEFORE USING
Please, read the given instruction carefully before starting to operate the device.
Prior to the first use or after a long interruption of work, it is recommended to rinse
the nozzles / headpieces in warm soapy water.