2
This is the fastest way to get something out from your MP8D, if you have a keyboard and
a microphone.
a. Keep the Power switch in OFF position.
b. Turn down all the GAIN controls.
c. All the switches must be in OUT position.
d. Plug-in a microphone on Channel 1 MIC input.
e. Connect the output of Channel 1 (use the INSERT socket) to your mixer.
g. Connect the AES/EBU output of your MP8D to a digital input of your HDR or DAW.
h. Connect the ADAT pipeline of your MP8D to your ADAT Recorder.
Here you are. It is your MP8D.
f. Sing or speak into the microphone with normal volume and adjust the channel LEVEL
control of half.
3. QUICK START
i. If you are using a dynamic microphone, keep the +48V (phantom power) switch in OFF
position. If you are using a condenser microphone, press it in ON position.
j. Sing something into the microphone with normal volume and adjust the GAIN, so that
the -20 and 0 LEDs light continuously. CLIP LED should flash occasionally or not at all.
HOOK
UP
MP8D WITH A DAW
CH.1
MIC.
IN
OUT
WORD CLOCK
DIGITAL OUT
ADAT
S/PDIF-AES/EBU
AC INPUT
210-240V
50Hz
Rated Power
Consumption 35W
FUSE:
250V: T315mAL
REPLACE FUSE
WITH CORRECT
TYPE ONLY
Apparaten
skall
a
nslutas
till
jordat
uttag
nar
d
en
ansluts
till
ett
n
atverk
CH.2
MIC.
IN
CH.3
MIC.
IN
CH.4
MIC.
IN
CH.5
MIC.
IN
CH.6
MIC.
IN
CH.7
MIC.
IN
CH.8
IN
MIC.
IN
INSERT
INSERT
INSERT
INSERT
INSERT
INSERT
INSERT
INSERT
Useonly
witha
250Vfuse
PUSH
2
1
3
J.T.
PUSH
2
1
3
J.T.
2
1
3
J.T.
2
1
3
J.T.
2
1
3
J.T.
2
1
3
J.T.
GUITAR
BASS
DAW = Digital Work Station
Signal converter
