17
ENGLISH
File Commands:
-
SAVE:
it saves to PC the current equalization as .rde file.
-
LOAD:
it loads from PC an equalization previously saved as .rde file.
Eq. options
:
-
FLATTEN:
it disables all filters (flat frequency response).
-
BYPASS EQ.:
it disables the equalization, but without changing filter settings.
-
PHASE PLOT:
if selected, the phase plot is shown (green line).
Devices commands
:
-
STORE:
it sends and stores the equalization to the VSA speaker.
-
SEND:
it sends (without storing) the equalization to the VSA speaker.
For each filter, frequency and gain can be adjusted either graphically (through the mouse) by
dragging the little coloured square or in an analytical way (by inserting values in cells or rotating
controls).
The overall equalization is shown as a red line, the intervention of the selected filter as a green
line, the intervention of a filter that is not selected as a white line.
For example, to apply a 12 dB attenuation for frequencies below 80 Hz: enable the filter 1 by
clicking its ‘Enabled’ checkbox, select the SHELVING LOW filter type, set the gain to –12 dB and
frequency to 80 Hz .
