Getting started
10
Battery
Charging the battery
MX is equipped with built-in rechargeable battery
Use only the supplied power adapter and USB cable to charge the battery. Do not
remove the battery from the phone.
If the battery is critical, the MX will not boot. Connect it to a power adapter, and MX
will display the charging animation. When the red battery changes color to green,
press the Power button to boot into the Home screen. The Lock screen displays
charging status. When the battery is full, a fully green battery is shown on the Lock
screen, and the animation stops. Disconnect the power adapter from the power
outlet, and then disconnect the MX.
1 Check that the USB cable has
the M logo facing downwards,
and plug it into the phone's
Micro USB port.
2 Make sure that the USB cable is
plugged into the power adapter,
and plug the power adapter into
a power outlet.
Note:
Do not attempt to remove the back cover to repair or replace the battery.
Note:
1 It normally takes 2-3 hours to
fully charge the phone. This
can vary depending on if the
phone is on, if there are any
calls while charging, etc.
2 For safety reasons, please use
the standard USB cable and
power adapter.
· Charge the phone using power adapter or USB cable:
