3. Connect the black clip to the negative pole of battery; connect the
red clip to the positive pole. If it is too loosen, will result no current,
wire heat, and damage the power inverter or cause the fire.
4. Turn on the power inverter; connect this device with the applicant
to be used.
5. If you don’t use the power inverter, please disconnect the wires.
Operation instuction for connection through the
sigarette plug output:
1. Connect this device with the cigarette plug output; please check
whether the plug fit the cigarette output.
2. Turn on the power inverter; please make sure the device indicator
is on.
3. Connect this device with the applicant to be used.
4. If you don’t use the power inverter, please disconnect it.
5. Before use, please confirm the input voltage of inverter is matched
to the output of car cigar plug, and confirm the rated power of
applicant within the range of power inverter.
Warning
1. Before use, please confirm the input voltage of inverter is matched
to with the output of the battery or car battery, and confirm the
rated power of applicant within the range of power inverter.
2. DC 12V input voltage device only charge 12V battery, DC 24V
input voltage device charge only 24V battery.
3. The temperature of the shell will be high after longtime working,
so do not touch it in case scalded;
4. Ventilation: keep 10cm ambient space at least for ventilation, and
don’t block the air-vent.
5. Please do not use this device to the place with rain, sun light,
heating devices, wet and dusty. Otherwise, it will lead to accident.
6. Please do not dismantle and modify the device.
7. To avoid the electric shock, please do not handle plug of this
device or electric device using wet hand.
