Outer dimensions of the decorative frame:
To install a sauna stove:
The wall between the heating room and sauna
stove must be of non-combustible material, for
example bricks.
Dimension A is determined based on
the protection method
used for wooden surfaces
- Without protection 400 mm
- Single-light protection
- Double- light protection
Fig. 11
Size of the tunnel opening:
Fig. 12
Fig. 13
We recommend a mineral wool mat for compaction
of the brick wall and tunnel part to allow room for
thermal expansion. The tunnel model is attached to
the flue from the top of the sauna stove.
Distance to the bottom
edge of the flue behind
the firebox.
Fig. 10
There are two opening for connecting the firebox
with the smoke flue, which are located on top and
rear of the firebox. Block the unused opening
with the cover plate included in the delivery.
Also included in the delivery is a 200 mm flue
pipe connector for connection of the sauna
woodburning stove to a rear flue pipe. When
connecting the sauna woodburning stove to the
flue from the top of the woodburning stove, always
use NARVI chimney pipes or NARVI chimney flues.
Do not install the flue adapter pipe too deeply into the chimney flue, as this will reduce
the flue draw. The gap between the flue adapter pipe and the chimney flue must be
insulated e.g. with mineral wool. The sauna woodburning stove comes fitted with
adjustable feet to assist accurate installation.
In order to connect the flue to the rear opening, the round detail must first be
removed from the rear of the firebox casing, by using a hacksaw, for example, to saw
through the part that attaches it to the casing.
In connection with the sauna woodburning stove
installation, ensure that the woodburning stove
stands firmly on its base and that all of the safety
distances mentioned in these instructions have
been observed correctly.
