13
Handle carefully the sharp blades especially
during removing and emptying the container
and during cleaning.
Do not touch the blades of the blender bar,
especially when the appliance is plugged in. The
blades are very sharp.
If the blades get stuck, unplug the appliance before
you remove the ingredients that block the blades.
Be very careful when you handle or clean the
blade unit or the combination disc. Their cutting
edges are very sharp. Be especially careful when
you clean them and when you empty the bowl.
The bowl is not suitable for use in microwave
ovens.
Noise level: Lc < 72 dB(A)
Handling the appliance
The appliance is used for mixing mayonnaise,
gravy, shakes, baby food, and for chopping
onions, ice, cooked fruit and vegetables.
Caution!
Hand blender is not suitable for the
preparation of mashed potatoes.
Attach the blending device (5) to the appliance (1).
Insert food into the beaker or any other suitable
bowl.
Grip both the blender and the bowl. To prevent
splashing first dip the blender blade into the food
and then press the ON button (2, 3).
Press and hold the normal (2) or turbo speed (3)
button to switch on the appliance. When you use
the normal speed button, you can adjust the speed
with the speed selector (4). The higher the speed,
the shorter the processing time required. To select
a different speed setting, turn the speed selector to
the preferred setting before or while you press the
normal speed button. When you use the turbo
speed button, e appliance operates at maximum
speed. In this case, you cannot adjust the speed
with the speed selector.
Caution
! When finished first switch the blender off
and then lift it from the bowl.
Warning: Do not process more than 30
seconds without interruption. Let the
appliance cool down to room temperature
before you continue processing.
Universal chopper
It is used for chopping herbs, onions, fruit,
vegetables, ice, hard cheese and meat.
Caution
! Before chopping meat remove tendon,
gristle and bone tissue. Universal chopper is not
suitable for chopping coffee beans or horse radish.
Place the chopper bowl (8) on flat, solid worktop
and press the body unit (1) downwards.
Insert the chopping blade (7).
Put food in the chopping bowl (8).
Place the chopping bowl unit (6) on the chopper
bowl (8).
Turn the motor unit (1 on the chopper bowl unit (6)
until it looks.
Hold the appliance and the chopper bowl and push
the start button (2,3). Use speed control knob (4) to
select a speed or press the turbo button (3).
Note: If the ingredients stick to the wall of the
bowl, release the button to switch off the appliance
and loosen the ingredients with a spatula or add
some liquid.
Warning: Do not process more than 30
seconds without interruption. Let the
appliance cool down to room temperature
before you continue processing.
