1-4
Chapter 1: Product introduction
7.
AMD B350 SATA 6.0Gb/s ports (7-pin SATA6G_1~6)
These ports connect to SATA 6.0 Gb/s hard disk drives via SATA
6.0 Gb/s signal cables.
GND
RSATA_TXP
RSATA_TXN
GND
RSATA_RXN
RSATA_RXP
GND
SATA6G
8.
System panel connector (20-5 pin PANEL)
This connector supports several chassis-mounted functions.
•
System power LED (4-pin PWR_LED)
This 4-pin connector is for the system power LED. Connect
the chassis power LED cable to this connector. The system
power LED lights up when you turn on the system power,
and blinks when the system is in sleep mode.
•
Hard disk drive activity LED (2-pin HDD_LED)
This 2-pin connector is for the HDD Activity LED. Connect
the HDD Activity LED cable to this connector. The HDD LED
lights up or flashes when data is read from or written to the
HDD.
•
System warning speaker (4-pin SPEAKER)
This 4-pin connector is for the chassis-mounted system warning speaker. The speaker
allows you to hear system beeps and warnings.
•
ATX power button/soft-off button (2-pin PWR_SW)
This connector is for the system power button.
•
Reset button (2-pin RESET)
This 2-pin connector is for the chassis-mounted reset button for system reboot without
turning off the system power.
PLED+ PLED- PWR Ground
+5V_SPKO Ground Ground Speaker
HDD_LED+ HDD_LED-
Ground RESET
NC
PLED+
PLED-
PIN 1
+PWR_LED-
+PWR_LED-
SPEAKER
PANEL
+HDD_LED-
PWR_SW
RESET
* Requires an ATX power supply
9.
USB 3.0 connector (20-1 pin USB3_12)
This connector allows you to connect a USB 3.0 module
for additional USB 3.0 front or rear panel ports. With an
installed USB 3.0 module, you can enjoy all the benefits
of USB 3.0 including faster data transfer speeds of up to
5Gbps, faster charging time for USB-chargeable devices,
optimized power efficiency and backward compatibility
with USB 2.0.
USB3_12
PIN 1
USB3+5V IntA_P1_SSRX- IntA_P1_SSRX+ GND IntA_P1_SSTX- IntA_P1_SSTX+ GND IntA_P1_D- IntA_P1_D+ GND
USB3+5V
IntA_P2_SSRX- IntA_P2_SSRX+
GND
IntA_P2_SSTX- IntA_P2_SSTX+
GND
IntA_P2_D- IntA_P2_D+
6.
DDR4 DIMM slots
Install 2 GB, 4 GB, 8 GB, and 16 GB unbuffered ECC and non-ECC DDR4 DIMMs into
these DIMM sockets.
For more details, refer to
System memory
.
