11
ENGLISH
To deactivate the TA Standby Reception
goes off.
PTY Standby Reception
PTY Standby Reception allows the unit to
switch temporarily to your favorite programme
type from any source other than AM.
• This function also takes effect for the DAB
tuner.
To activate the PTY Standby Reception and
select the PTY codes
1
2
Activating the PTY Standby Reception.
Display the currently selected PTY code.
3
Selecting a PTY code.
4
Exit from the setting.
either lights up or flashes on the display.
• If
lights up, PTY Standby Reception is
activated.
• If
flashes, PTY Standby Reception is not
yet activated.
To activate PTY Standby Reception, tune in
to another station (or service) providing the
related signals.
will stop flashing and
remain lit.
To deactivate the PTY Standby Reception
Select “PTY Off” in step
2
above.
goes off.
5
Store the selected PTY code.
EX.: When “Classics” is selected in step
4
on page 10
6
Repeat steps
3
to
5
to store other PTY
codes into other preset numbers.
7
Exit from the setting.
Using the standby receptions
TA Standby Reception
TA Standby Reception allows the unit to switch
temporarily to Traffic Announcement (TA)
from any source other than AM.
• If a station starts broadcasting a traffic
announcement, “Traffic News” appears on the
display, and this unit temporarily tunes in to
the station. The volume changes to the preset
TA volume level if the current level is lower
than the preset level (see page 21).
To activate the TA Standby Reception
either lights up or flashes on
the display.
• If
lights up, TA Standby Reception is
activated.
• If
flashes, TA Standby Reception is not
yet activated. (This occurs when you are
listening to an FM station without the RDS
signals required for TA Standby Reception.)
To activate TA Standby Reception, tune in
to another station (or service) providing the
related signals.
will stop flashing and
remain lit.
EN06-17KD-G827[EE]f.indd 11
EN06-17KD-G827[EE]f.indd 11
12/23/05 9:51:53 AM
12/23/05 9:51:53 AM
