PHILIPS CED1900 инструкция по эксплуатации онлайн - страница 10


Инструкция PHILIPS CED1900 для устройства автомобильная аудиосистема содержит страницы на английском языке.

Размер файла: 1.82 MB. Состоит из 52 стр.


Вы можете скачать pdf файл этой инструкции: Скачать PDF


Предыдущая
Следующая
background image

8

EN

3  Install the car 

entertainment 

system

Always follow the instructions in this chapter in 

sequence.

These instructions are for a typical installation. 

However, if your car has different requirements, 

make the adjustment accordingly. If you have 

any question regarding installation kits, consult 

your local retailer.

Note

 

This system is designed for negative ground (earth) 12V 

DC operation only.

 

Always install this system in the car dashboard. Other 

locations can be dangerous as the rear of the system 

heats up during use.

 

To avoid short-circuit: before you connect, make sure 

that the ignition is off.

 

Make sure that you connect the yellow and red power 

supply leads after all other leads are connected.

 

Make sure that all loose leads are insulated with 

electrical tape.

 

Make sure that the leads do not get caught under 

screws iron parts that will move (e.g. seat rail).

 

Make sure that all ground (earth) leads are run to a 

common ground (earth) point.

 

Use only the supplied mounting hardware for a safe 

and secure installation.

 

Improper fuses can cause damage or fire. When you 

need to change the fuse, consult a professional.

 

When you connect other devices to this system, make 

sure that the rating of the car circuit is higher than the 

total fuse value of all the connected devices.

 

Never connect speaker wires to the metal body or 

chassis of the car.

 

Never connect speaker wires with stripes to one 

another.

Connect wires

Note

 

Make sure that all loose leads are insulated with 

electrical tape.

 

Consult a professional to connect wires as instructed 

below.

 

Before connection, check the car's wiring carefully.

Connect the ISO male connectors.

 

 

ISO male connectors Connect to

1 Green strip, black-

edged green strip

Rear left speaker

2 White strip, black-

edged white strip

Front left speaker

3 Gray strip, black-

edged gray strip

Front right speaker

4 Purple strip, black-

edged purple strip

Rear right speaker

e Red strip

Ignition key +12V 

DC when ON/ACC

f

Blue strip

Motor/electric 

antenna relay 

control lead

g Blue strip, white strip Amplifier relay 

control lead

h Black strip

Ground

i

Yellow strip

The +12V car 

battery which is 

energized at all times


Что удобнее для чтения книг?

Планшет
Электронная книга
Смартфон
Книга в бумажном переплёте
Не читаю книг

QR код manualbase.ru
©  2010- ManualBase.ru