Snow Engine Manual
7
rev. 01/04/16
STOPPING THE ENGINE (fig. 2)
To stop the engine in an emergency:
1. Flip Rocker Switch to STOP position (with a rotary type switch, turn the key
to the STOP position (see insert).
2. Pull Safety Key from Engine.
Under normal conditions, use the following procedure:
1. Flip Rocker Switch to STOP position (with a rotary type switch, turn the
key to the STOP position (see insert).
2. Pull Safety Key from Engine and store in a safe place for future use.
HIGH ALTITUDE OPERATION
Carburetor Modifications
The standard carburetor air-fuel mixture may be too rich when operated at high altitude resulting in possible decreased performance
and increased fuel consumption. Please have an authorized Service Center modify this engine’s carburetor if it is operated
continuously above 5000 feet. Failure to modify may result in poor engine performance, spark plug fouling, hard starting, and
increased emissions.
Carburetor modification by an authorized Service Center will improve performance and allow this engine to continually meet US EPA
and California ARB emission standards throughout its useful life.
Important Note
When the carburetor has been modified for high altitude operation, the air-fuel mixture may be too lean for operation at 5000 feet or
below. This could result in the engine overheating and could cause serious engine damage. Please have an authorized Service Center
restore high altitude converted carburetors back to the original factory specification before operating below 5000 feet.
To locate the nearest dealer, please visit our website or call our toll free hotline:
www.lctusa.com
Toll Free: (800) 558-5402
Operation
CONTINUED
1
2
fig.2
PGH45600
3X’s
MAX
RUN
START
ON
OFF
FUEL
Optional combined
Engine Run/Stop
and Safety Key Switch
