Safety
• The SurgeArrest is intended for indoor use only. The internal components are not sealed from the
environment.
• Do not install the SurgeArrest where there is excessive heat or humidity.
• Do not use extension cords with the SurgeArrest.
• We suggest plugging of the SurgeArrest into a grounded outlet only.
• Never install electrical wiring during a lightning storm.
Indicators, Connectors and Switches
ON/OFF switch
-The
ON/OFF
switch provides on/off power control to all of the outlets.
Circuit breaker:
When an output overload condition occurs, the power automatically turn off to
disconnect all equipment from the SurgeArrest. Unplug all the euqipment, then push the circuit breaker to
reset the surge protector before re-plugging the equipment.
Protection Working
-The LED is normally illuminated indicating that the surge protector is on and ready
to protect connected equipment. If the LED is not illuminated the surge suppression circuitry has been
compromised. Contact APC using the contact information provided in this guide.
Specifications
Limited Warranty
APC by Schneider Electric warrants its Surge Protectors to be free from defects in materials and
workmanship under normal use and service for five (5) years. Schneider Electric IT (SEIT) obligation
under this warranty is limited to repairing or replacing, at its own sole option, any such defective products.
© 2014 APC by Schneider Electric. APC, the APC logo are owned by Schneider Electric Industries
S.A.S., or their affiliated companies. All other trademarks are property of their respective owners.
P43-RS
P43B-RS
Nominal Operating
Voltage
230 Vac,
2300 watts, 50Hz
Maximum Amperage
10 A
Joule Rating
918 Joules
Cord Length
1 m (3.28 ft)
Dimensions
H x W x D
27.6 cm x 5.6 cm x 4.0 cm
10.87 in x 2.20 in x 1.57 in
EN 990-9617
05/2014
Essential SurgeArrest P43-RS/P43B-RS
Customer Support Worldwide: For country specific customer support, go to the APC by Schneider Electric
Web site, www.apc.com.